Philips SQM4712/27 manual BWarnings, Your tilting wall mount

Page 3

1 Important

Take time to read this manual before you use your wall mount. It contains important information and notes regarding operating your wall mount.

© 2008 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.

BWarnings

Make sure these instructions are read and thoroughly understood before attempting installation. If you are unsure of any part of this installation, contact a professional installer for assistance or contact Customer Service at 1-919- 573-7854.

This product has been designed for application on a vertical wall in commercial and residential buildings, constructed of wood wall studs or masonary (solid concrete, brick, and stone). If you are unsure of your wall composition or for assistance with other surfaces, contact a qualified installer.

This product is not designed for use on walls constructed of metal studs. If you are unsure of your wall composition or for assistance with other surfaces, contact a qualified installer.

The wall or mounting surface must be capable of supporting the combined weight of the mount and the display; otherwise the structure must be reinforced.

Do not exceed the maximum load capacity of 44 lbs for this product.

Safety gear and proper tools must be used. Failure to do so can result in property damage and/or serious injury.

A minimum of two people are required for this installation. Do not attempt to install this mount alone under any circumstance.

Follow all instructions and recommendations regarding adequate ventilation and suitable locations for mounting your display. Consult the owner’s manual for your display for more information.

This mount is equipped with a safety device that must be used whenever the mount holds a display. Not using the safety device can cause property damage, serious injury, or death.

2 Your tilting wall mount

Congratulations on your purchase and welcome to Philips!

To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

Designed to fit most TV brands with a focus on safety and ease of use. Includes Easy 1-2-3 installation kit, complete with: all necessary hardware for mounting on different types of walls, mounting templates, stud finder and bubble level. C-UL US listed for weight capacity up to 44lbs.

Image 3
Contents SQM4712/27 Table of contents Your tilting wall mount BWarningsWhat you’ll also need What’s in the boxInstalling your wall mount Tip Be careful not to over-tighten the bolts Final installation Final installation and operationGuarantee and service Table des matières Installation du support muralInstallation finale et Fonctionnement Garantie et serviceConsignes de sécurité importantes Votre support mural inclinableOutils requis Contenu de la boîteInstallation du support mural Conseil Assurez-vous de ne pas trop serrer les boulons Installation finale Installation finale et fonctionnementGarantie et service Último paso de la instalación ÍndiceImportante Soporte de pared basculante Instalación del soporte de paredSoporte de pared basculante ImportanteOtros elementos necesarios Contenido del kitInstalación del soporte Page Último paso Último paso de la instalaciónGarantía y servicio técnico Page Koninklijke Philips Electronics All rights reserved