Philips TH-42PH10EK operating instructions Adjusting Pos. / Size, Normalisation

Adjusting Pos. / Size

1

2

3

Press to display the Pos. /Size menu.

Press to select H-Pos / H-Size / V-Pos / V-Size /

Clock Phase.

Press to adjust Pos. / Size.

During “AV(S Video)”, “Component” and “Digital” input signal.

4 Press to exit from adjust mode.

Notes:

•Adjustment details are memorized separately for different input signal formats (Adjustments for component signals are memorized for 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p each, and RGB/PC/Digital signals are memorized for each frequency.)

•If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture position will shift up or down. This picture position movement cannot be controlled by the Picture Pos./Size function.

•If adjusting the Picture V-Pos/V-Size in Panasonic Auto with 16:9 mode, the adjustment is not memorized. When exiting the mode, the screen will return to a former adjustment.

Pos. /Size

Normalise		Normal
	H-Pos	0
	H-Size	0
	V-Pos	0
	V-Size	0

During “RGB / PC” input signal.

Pos. /Size

Normalise Normal

H-Pos	0
H-Size	0
V-Pos	0
V-Size	0
Clock Phase	0

H-PosAdjust the horizontal position. H-SizeAdjust the horizontal size.

V-PosAdjust the vertical position. V-SizeAdjust the vertical size.

Clock Phase	Eliminate the flickering and distortion.
(RGB/PC in mode)

Helpful Hint ( /

Normalise

Normalisation)

While the Pos. / Size display is active, if either the N button on the remote control is pressed at any time or the ACTION () button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.

19