Philips TH-42PH10EK operating instructions Picture Adjustments, Normal, Dynamic, Cinema

Page 22

Picture Adjustments

1

2

Press to display the Picture menu.

Select to adjust each item.

Press to select the menu to adjust.

Select the desired level by looking at the picture behind the menu.

Note:

Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting.

Picture		1/2
Normalise	Normal	Normal
Picture Mode		Normal
Contrast		25
Brightness		0
Colour		0
Tint		0
Sharpness		5
Picture		2/2
White balance		Normal
Colour Management		Off
Advanced settings		On

Press to select “On”.

Press to enter

Advanced settings.

Advanced settings On

Enables ﬁne picture adjustment at a professional level.

For TH-42PS10EK/S : see page 23

For TH-42PH10EK/S,

TH-50PH10EK/S,

TH-58PH10EK : see page 24

Advanced settings Off

Displays images with settings of the

Picture menu.

Press “” or “” button to switch between modes.

Normal

Cinema Dynamic

Normal

For viewing in standard (evening lighting) environments. This menu selects the normal levels of Brightness and Contrast.

Dynamic

For viewing in brighter environments.

This menu selects higher than normal levels of Brightness and Contrast.

Cinema

Ideal for movies.

Note:

If you would like to change the picture and colour of the selected Picture menu to something else, adjust using the items in the Picture menu. (see next page)

Press “” or “” button to switch between modes.

Normal Cool Warm

Colour Management On

Enables vivid colour adjustment automatically.

Helpful Hint ( /

Normalise

Normalisation)

While the “Picture” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION () button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.

22

Image 22

Contents Model No. TH-42PS10EK High Deﬁnition Plasma DisplayOperating Instructions Model No. TH-42PH10EKTable of Contents Important Safety Notice Trademark CreditsDo not place any objects on top of the Plasma Display Safety PrecautionsSetup Transport only in upright positionWhen using the Plasma Display Safety PrecautionsIf problems occur during use Clean the power cable regularly to prevent it becoming dusty Electric shocks can result if this is not doneAccessories Supply AccessoriesRemote Control Batteries Speakers ConnectionsAC cord ﬁxing PC Input Terminals connection Signal Names for Mini D-sub 15P ConnectorConnections Computer CommandSerial Terminals connection Communication parametersAV connection for TH-42PH10EK/S, TH-50PH10EK/S, TH-58PH10EK Video VCR CamcorderConnecting the AC cord plug to the Plasma Display Power On / OffConnecting the plug to the Wall Outlet Selecting the On-Screen Menu Language Selecting the input signalInitial selections INPUT1 INPUT2 INPUT3 PCBasic Controls Basic Controls On-Screen Menu Displays On-Screen Menu Displays Board TY-FB9BD, Panasonic Auto cannot be selected Aspect mode changes each time the Enter button isAspect Controls Pressed Adjusting Pos. / Size NormalisationMulti PIP Advanced PIP TH-42PS10EK/STH-58PH10EKDynamic Picture AdjustmentsNormal CinemaAdvanced settings Picture AdjustmentsHigh Effect Details BlackLow G Sound Adjustment MuteSelect the area of the image to be enlarged Digital ZoomDisplay the operation guide Select the magniﬁcation required for the enlarged displayPresent Time Setup / Set up Timer Present Time SetupSet up Timer Present Time Setup / Set up TimerScreensaver For preventing image retention Mode selectionStart setting Reversal / Scroll selectionReduces screen image retention Setup of Screensaver TimeScreensaver For preventing image retention Side Panel Adjustment This function may be applicable to the non-picture areaAddition sign Selected Input Reduces power consumptionCustomizing the Input labels CompositeSetup for Multi Display How to Setup Multi Display× 2 F × 3 F × 4 F Press twice to exit from Setup Setup for Multi DisplayDisplay Number locations for each arrangement Press to select Vertical Scale Press to select × 1, × 2, × 3, ×Power On Screen Delay Display Number locations for each arrangement. ExamplesID remote control button operation Seam hides video SettingID Remote Control Function ID Cancellation3D Y/C Filter For Ntsc AV images Setup for Input SignalsComponent / RGB-in select RGBColour system / Panasonic Auto Setup for Input SignalsCinema reality / P-NR Freq. kHz / V-Freq. Hz Setting RGB sync signalSync Displays the H Horizontal / V Vertical frequenciesOptions Adjustments Effect AdjustmentsOptions Adjustments Off User1 User2 NormalizationLocks Buttons on bottom face of main unit RemoconCommand TimerMenu & Enter Press Off MENU&ENTER OnOff Press Off User1 User2 User3Normal Standby Off-timer EnableInitial Power ModeSlot1 You can set the program from 1 to Press to select a dayPress to select a program number Indicates unsetCommand setting screen ProgramShipping condition Troubleshooting Plasma Display panelPAL VIDEO/PC input signalsVideo input for TH-42PH10EK/S, TH-50PH10EK/S, TH-58PH10EK PAL60Command list of Weekly Command Timer Speciﬁcations Speciﬁcations TH-42PH10EK/S TH-50PH10EK/S TH-58PH10EKFor business users in the European Union Customer’s Record