Philips TH-42PH10EK operating instructions Connections, Speakers, AC cord fixing

Page 8
Unplug the AC cord pressing the two knobs.

Connections

When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speaker’s Installation Manual for details on speaker installation. (Example: TH-42PH10EK)

Speakers (Optional accessories)

SPEAKERS

Terminals (L)

SPEAKERS

AC cord connection

Terminals (R)

(see page 12)

 

 

– AC cord fixing

1

 

2

1

 

 

2

Plug the AC cord into the display unit. Plug the AC cord until it clicks.

Note:

Make sure that the AC cord is locked on both the left and right sides.

Unplug the AC cord

Note:

When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet first.

– Cable fixing bands Secure any excess cables with bands as required.

Pass the attached cable fixing band through the clip as shown in the figure.

To secure cables connected to Terminals, wrap the cable fixing band around them then pass the pointed end through the locking block, as shown in the figure.

While ensuring there is sufficient slack in cables to minimize stress (especially in the power cord), firmly bind all cables with the supplied fixing band.

To tighten:

To loosen:

Push the catch

 

 

 

 

 

 

Pull

 

 

 

1

 

 

 

 

2

 

 

 

Pull

R AUDIO

L

S VIDEO R

AUDIO

L

VIDEO

 

 

 

AUDIO

 

B

AV IN

 

A

 

 

 

 

 

 

 

SLOT1

 

SLOT2

SLOT3

PC

IN

SERIAL

Dual Video Terminals (equivalent of BNC Dual Video Terminal Board (TY-FB9BD)) (see page 11)

Optional Terminal Board Insert Slot (covered)

From EXTERNAL monitor terminal on Computer (see page 9)

From SERIAL Terminal on Computer

(see page 10)

Notes:

•On TH-42PH10EK/S, TH-50PH10EK/S and TH-58PH10EK, Terminal board is installed in SLOT 1 at factory shipment.

•On TH-42PS10EK/S, SLOT 1-3 are all empty at factory shipment.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents High Definition Plasma Display Operating InstructionsModel No. TH-42PS10EK Model No. TH-42PH10EKTable of Contents Important Safety Notice Trademark CreditsSafety Precautions SetupDo not place any objects on top of the Plasma Display Transport only in upright positionIf problems occur during use Safety PrecautionsWhen using the Plasma Display Clean the power cable regularly to prevent it becoming dusty Electric shocks can result if this is not doneRemote Control Batteries AccessoriesAccessories Supply AC cord fixing ConnectionsSpeakers Connections Signal Names for Mini D-sub 15P ConnectorPC Input Terminals connection Command Serial Terminals connectionComputer Communication parametersAV connection for TH-42PH10EK/S, TH-50PH10EK/S, TH-58PH10EK Video VCR CamcorderConnecting the plug to the Wall Outlet Power On / OffConnecting the AC cord plug to the Plasma Display Selecting the input signal Initial selectionsSelecting the On-Screen Menu Language INPUT1 INPUT2 INPUT3 PCBasic Controls Basic Controls On-Screen Menu Displays On-Screen Menu Displays Aspect mode changes each time the Enter button is Aspect ControlsBoard TY-FB9BD, Panasonic Auto cannot be selected PressedAdjusting Pos. / Size NormalisationMulti PIP Advanced PIP TH-42PS10EK/STH-58PH10EKPicture Adjustments NormalDynamic CinemaAdvanced settings Picture AdjustmentsLow G Effect Details BlackHigh Sound Adjustment MuteDigital Zoom Display the operation guideSelect the area of the image to be enlarged Select the magnification required for the enlarged displayPresent Time Setup / Set up Timer Present Time SetupSet up Timer Present Time Setup / Set up TimerMode selection Start settingScreensaver For preventing image retention Reversal / Scroll selectionScreensaver For preventing image retention Setup of Screensaver TimeReduces screen image retention Side Panel Adjustment This function may be applicable to the non-picture areaReduces power consumption Customizing the Input labelsAddition sign Selected Input CompositeSetup for Multi Display How to Setup Multi DisplayDisplay Number locations for each arrangement Setup for Multi Display× 2 F × 3 F × 4 F Press twice to exit from Setup Press to select Vertical Scale Press to select × 1, × 2, × 3, ×Power On Screen Delay Display Number locations for each arrangement. ExamplesSeam hides video Setting ID Remote Control FunctionID remote control button operation ID CancellationSetup for Input Signals Component / RGB-in select3D Y/C Filter For Ntsc AV images RGBCinema reality / P-NR Setup for Input SignalsColour system / Panasonic Auto Setting RGB sync signal SyncFreq. kHz / V-Freq. Hz Displays the H Horizontal / V Vertical frequenciesOptions Adjustments Effect AdjustmentsOptions Adjustments Normalization Locks Buttons on bottom face of main unitOff User1 User2 RemoconCommand TimerOff MENU&ENTER On Off PressMenu & Enter Press Off User1 User2 User3Off-timer Enable Initial PowerNormal Standby ModeSlot1 Press to select a day Press to select a program numberYou can set the program from 1 to Indicates unsetCommand setting screen ProgramShipping condition Troubleshooting Plasma Display panelVIDEO/PC input signals Video input for TH-42PH10EK/S, TH-50PH10EK/S, TH-58PH10EKPAL PAL60Command list of Weekly Command Timer Specifications Specifications TH-42PH10EK/S TH-50PH10EK/S TH-58PH10EKFor business users in the European Union Customer’s Record

TH-42PH10EK specifications

The Philips TH-42PH10EK is a prominent model in the world of professional displays, specifically designed for commercial environments like retail, conference rooms, and public venues. This 42-inch plasma display offers a perfect combination of cutting-edge technology, sleek design, and versatile functionality, making it a favored choice for many business applications.

One of the key features of the TH-42PH10EK is its superb picture quality. It utilizes plasma technology, which is known for delivering deep blacks, vibrant colors, and exceptional contrast ratios. With a resolution of 1024 x 768 pixels, this display ensures that images are sharp and detailed, which is crucial for presentations, digital signage, or any visual content requiring clarity and professionalism.

The display also boasts a commendable viewing angle, allowing content to be viewed clearly from various positions in the room. This characteristic is particularly beneficial in settings where large audiences need to see the screen from different angles. The high brightness level of the TH-42PH10EK also aids visibility in environments with ambient light, ensuring that presentations remain effective even in well-lit spaces.

Another noteworthy aspect of the Philips TH-42PH10EK is its connectivity options. The display comes equipped with a range of input options, including VGA, HDMI, and composite video, allowing users to connect various devices seamlessly. This versatility makes it easy to integrate the display into different setups, whether for presentations, video conferencing, or media playback.

In terms of durability, the TH-42PH10EK is designed for continuous use, making it ideal for applications that require long operating hours. Its robust build quality ensures that it can withstand the rigors of daily usage in a commercial setting. Additionally, the display features advanced heat management systems, which help maintain optimal performance without overheating.

The aesthetics of the Philips TH-42PH10EK are also notable. Its slim bezel design provides a modern look, allowing it to blend seamlessly into any professional environment while maximizing screen space for content display.

In conclusion, the Philips TH-42PH10EK is a reliable and high-performance plasma display, making it an excellent choice for businesses needing a robust solution for their visual communication needs. With its superior image quality, extensive connectivity options, and durable design, the TH-42PH10EK stands out as a dependable choice in the competitive market of professional displays.
Top Page Image Contents