Philips TH-42PH10EK operating instructions Safety Precautions, When using the Plasma Display

Page 5

Safety Precautions

Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table cloths and curtains.

For sufficient ventilation;

If using the pedestal (optional accessory) for the Plasma Display, leave a space of at least 10 cm at the top, left and right, at least 6 cm at the bottom, and at least 7 cm at the rear. If using some other setting-up method, leave a space of at least 10 cm at the top, bottom, left and right, and at least 7 cm at the rear.

When using the Plasma Display

The Plasma Display is designed to operate on 220 - 240 V AC, 50/60 Hz.

Do not cover the ventilation holes.

• Doing so may cause the Plasma Display to overheat, which can cause fire or damage to the Plasma Display.

Do not stick any foreign objects into the Plasma Display.

•Do not insert any metal or flammable objects into the ventilations holes or drop them onto the Plasma Display, as doing so can cause fire or electric shock.

Do not remove the cover or modify it in any way.

•High voltages which can cause severe electric shocks are present inside the Plasma Display. For any inspection, adjustment and repair work, please contact your local Panasonic dealer.

Ensure that the mains plug is easily accessible.

An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing connection.

Do not use any power supply cord other than that provided with this unit.

• Doing so may cause fire or electric shocks.

Securely insert the power supply plug as far as it will go.

•If the plug is not fully inserted, heat may be generated which could cause fire. If the plug is damaged or the wall socket is loose, they shall not be used.

Do not handle the power supply plug with wet hands.

• Doing so may cause electric shocks.

Do not do anything that may damage the power cable. When disconnecting the power cable, pull on the plug body, not the cable.

•Do not damage the cable, make any modifications to it, place heavy objects on top of it, heat it, place it near any hot objects, twist it, bend it excessively or pull it. To do so may cause fire and electric shock. If the power cable is damaged, have it repaired at your local Panasonic dealer.

If the Plasma Display is not going to be used for any prolonged length of time, unplug the power supply plug from the wall outlet.

If problems occur during use

If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odour starts to come out from the Plasma Display, immediately unplug the power supply plug from the wall outlet.

•If you continue to use the Plasma Display in this condition, fire or electric shock could result. After checking that the smoke has stopped, contact your local Panasonic dealer so that the necessary repairs can be made. Repairing the Plasma Display yourself is extremely dangerous, and shall never be done.

If water or foreign objects get inside the Plasma Display, if the Plasma Display is dropped, or if the cabinet becomes damages, disconnect the power supply plug immediately.

•A short circuit may occur, which could cause fire. Contact your local Panasonic dealer for any repairs that need to be made.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Operating Instructions High Definition Plasma DisplayModel No. TH-42PS10EK Model No. TH-42PH10EK Table of Contents Trademark Credits Important Safety NoticeSetup Safety PrecautionsDo not place any objects on top of the Plasma Display Transport only in upright positionIf problems occur during use Safety PrecautionsWhen using the Plasma Display Electric shocks can result if this is not done Clean the power cable regularly to prevent it becoming dustyRemote Control Batteries AccessoriesAccessories Supply AC cord fixing ConnectionsSpeakers Connections Signal Names for Mini D-sub 15P ConnectorPC Input Terminals connection Serial Terminals connection CommandComputer Communication parametersVideo VCR Camcorder AV connection for TH-42PH10EK/S, TH-50PH10EK/S, TH-58PH10EKConnecting the plug to the Wall Outlet Power On / OffConnecting the AC cord plug to the Plasma Display Initial selections Selecting the input signalSelecting the On-Screen Menu Language INPUT1 INPUT2 INPUT3 PCBasic Controls Basic Controls On-Screen Menu Displays On-Screen Menu Displays Aspect Controls Aspect mode changes each time the Enter button isBoard TY-FB9BD, Panasonic Auto cannot be selected PressedNormalisation Adjusting Pos. / SizeMulti PIP TH-42PS10EK/STH-58PH10EK Advanced PIPNormal Picture AdjustmentsDynamic CinemaPicture Adjustments Advanced settingsLow G Effect Details BlackHigh Mute Sound AdjustmentDisplay the operation guide Digital ZoomSelect the area of the image to be enlarged Select the magnification required for the enlarged displayPresent Time Setup Present Time Setup / Set up TimerPresent Time Setup / Set up Timer Set up TimerStart setting Mode selectionScreensaver For preventing image retention Reversal / Scroll selectionScreensaver For preventing image retention Setup of Screensaver TimeReduces screen image retention This function may be applicable to the non-picture area Side Panel AdjustmentCustomizing the Input labels Reduces power consumptionAddition sign Selected Input CompositeHow to Setup Multi Display Setup for Multi DisplayDisplay Number locations for each arrangement Setup for Multi Display× 2 F × 3 F × 4 F Press twice to exit from Setup Press to select × 1, × 2, × 3, × Press to select Vertical ScaleDisplay Number locations for each arrangement. Examples Power On Screen DelayID Remote Control Function Seam hides video SettingID remote control button operation ID CancellationComponent / RGB-in select Setup for Input Signals3D Y/C Filter For Ntsc AV images RGBCinema reality / P-NR Setup for Input SignalsColour system / Panasonic Auto Sync Setting RGB sync signalFreq. kHz / V-Freq. Hz Displays the H Horizontal / V Vertical frequenciesEffect Adjustments Options AdjustmentsOptions Adjustments Locks Buttons on bottom face of main unit NormalizationOff User1 User2 RemoconTimer CommandOff Press Off MENU&ENTER OnMenu & Enter Press Off User1 User2 User3Initial Power Off-timer EnableNormal Standby ModeSlot1 Press to select a program number Press to select a dayYou can set the program from 1 to Indicates unsetProgram Command setting screenShipping condition Plasma Display panel TroubleshootingVideo input for TH-42PH10EK/S, TH-50PH10EK/S, TH-58PH10EK VIDEO/PC input signalsPAL PAL60Command list of Weekly Command Timer Specifications TH-42PH10EK/S TH-50PH10EK/S TH-58PH10EK SpecificationsCustomer’s Record For business users in the European Union
Top Page Image Contents