Philips TH-42PH10EK operating instructions PC Input Terminals connection, Connections

Page 9

Connections

PC Input Terminals connection

COMPUTER

AUDIO

PC IN

Conversion adapter

 

(if necessary)

Mini D-sub 15p

 

 

RGB

 

PC cable

Audio

Stereo plug

 

Connect a cable which matches

the audio output terminal on the computer.

Notes:

•Due to space limitations, occasionally you may have trouble connecting Mini D-sub 15P cable with ferrite core to PC input Terminal.

•Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)

•The display resolution is a maximum of 640 × 480 dots (TH-42PS10EK/S), 768 × 768 dots (TH-42PH10EK/S), 1,024 × 768 dots (TH-50PH10EK/S, TH-58PH10EK) when the aspect mode is set to “4:3”, and 852 × 480 dots (TH-42PS10EK/S), 1,024 × 768 dots (TH-42PH10EK/S), 1,366 × 768 dots (TH-50PH10EK/S, TH-58PH10EK) when the aspect mode is set to “16:9”. If the display resolution exceeds these maximums, it may not be possible to show fine detail with sufficient clarity.

•The PC input terminals are DDC2B-compatible. If the computer being connected is not DDC2B-compatible, you will need to make setting changes to the computer at the time of connection.

•Some PC models cannot be connected to the set.

•There is no need to use an adapter for computers with DOS/V compatible Mini D-sub 15P terminal.

•The computer shown in the illustration is for example purposes only.

•Additional equipment and cables shown are not supplied with this set.

•Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified frequency range.

•Component Input is possible with the pin 1, 2, 3 of the Mini D-sub 15P Connector.

•Change the “Component/RGB-in select” setting in the “Setup” menu to “Component” (when Component connection) or “RGB” (when RGB signal connection). (see page 38)

•To use sync input VBS signals, use the connector which incorporates a 75-ohm termination resistance and which is available on the market, for the connection of the HD connector where the VBS signals are to be input.

Signal Names for Mini D-sub 15P Connector

5 4 3 2 1

10

9

 

8

7

6

15

14

 

13

12

 

11

Pin Layout for PC Input Terminal

Pin No.

Signal Name

Pin No.

Signal Name

Pin No.

Signal Name

1

R (PR/CR)

6

GND (Ground)

11

NC (not connected)

 

 

 

 

 

 

2

G (Y)

7

GND (Ground)

12

SDA

 

 

 

 

 

 

3

B (PB/CB)

8

GND (Ground)

13

HD/SYNC

 

 

 

 

 

 

4

NC (not connected)

9

NC (not connected)

14

VD

 

 

 

 

 

 

5

GND (Ground)

10

GND (Ground)

15

SCL

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Operating Instructions High Definition Plasma DisplayModel No. TH-42PS10EK Model No. TH-42PH10EKTable of Contents Trademark Credits Important Safety NoticeSetup Safety PrecautionsDo not place any objects on top of the Plasma Display Transport only in upright positionSafety Precautions When using the Plasma DisplayIf problems occur during use Electric shocks can result if this is not done Clean the power cable regularly to prevent it becoming dustyAccessories Accessories SupplyRemote Control Batteries Connections SpeakersAC cord fixing Signal Names for Mini D-sub 15P Connector PC Input Terminals connectionConnections Serial Terminals connection CommandComputer Communication parametersVideo VCR Camcorder AV connection for TH-42PH10EK/S, TH-50PH10EK/S, TH-58PH10EKPower On / Off Connecting the AC cord plug to the Plasma DisplayConnecting the plug to the Wall Outlet Initial selections Selecting the input signalSelecting the On-Screen Menu Language INPUT1 INPUT2 INPUT3 PCBasic Controls Basic Controls On-Screen Menu Displays On-Screen Menu Displays Aspect Controls Aspect mode changes each time the Enter button isBoard TY-FB9BD, Panasonic Auto cannot be selected PressedNormalisation Adjusting Pos. / SizeMulti PIP TH-42PS10EK/STH-58PH10EK Advanced PIPNormal Picture AdjustmentsDynamic CinemaPicture Adjustments Advanced settingsEffect Details Black HighLow G Mute Sound AdjustmentDisplay the operation guide Digital ZoomSelect the area of the image to be enlarged Select the magnification required for the enlarged displayPresent Time Setup Present Time Setup / Set up TimerPresent Time Setup / Set up Timer Set up TimerStart setting Mode selectionScreensaver For preventing image retention Reversal / Scroll selectionSetup of Screensaver Time Reduces screen image retentionScreensaver For preventing image retention This function may be applicable to the non-picture area Side Panel AdjustmentCustomizing the Input labels Reduces power consumptionAddition sign Selected Input CompositeHow to Setup Multi Display Setup for Multi DisplaySetup for Multi Display × 2 F × 3 F × 4 F Press twice to exit from SetupDisplay Number locations for each arrangement Press to select × 1, × 2, × 3, × Press to select Vertical ScaleDisplay Number locations for each arrangement. Examples Power On Screen DelayID Remote Control Function Seam hides video SettingID remote control button operation ID CancellationComponent / RGB-in select Setup for Input Signals3D Y/C Filter For Ntsc AV images RGBSetup for Input Signals Colour system / Panasonic AutoCinema reality / P-NR Sync Setting RGB sync signalFreq. kHz / V-Freq. Hz Displays the H Horizontal / V Vertical frequenciesEffect Adjustments Options AdjustmentsOptions Adjustments Locks Buttons on bottom face of main unit NormalizationOff User1 User2 RemoconTimer CommandOff Press Off MENU&ENTER OnMenu & Enter Press Off User1 User2 User3Initial Power Off-timer EnableNormal Standby ModeSlot1 Press to select a program number Press to select a dayYou can set the program from 1 to Indicates unsetProgram Command setting screenShipping condition Plasma Display panel TroubleshootingVideo input for TH-42PH10EK/S, TH-50PH10EK/S, TH-58PH10EK VIDEO/PC input signalsPAL PAL60Command list of Weekly Command Timer Specifications TH-42PH10EK/S TH-50PH10EK/S TH-58PH10EK SpecificationsCustomer’s Record For business users in the European Union

TH-42PH10EK specifications

The Philips TH-42PH10EK is a prominent model in the world of professional displays, specifically designed for commercial environments like retail, conference rooms, and public venues. This 42-inch plasma display offers a perfect combination of cutting-edge technology, sleek design, and versatile functionality, making it a favored choice for many business applications.

One of the key features of the TH-42PH10EK is its superb picture quality. It utilizes plasma technology, which is known for delivering deep blacks, vibrant colors, and exceptional contrast ratios. With a resolution of 1024 x 768 pixels, this display ensures that images are sharp and detailed, which is crucial for presentations, digital signage, or any visual content requiring clarity and professionalism.

The display also boasts a commendable viewing angle, allowing content to be viewed clearly from various positions in the room. This characteristic is particularly beneficial in settings where large audiences need to see the screen from different angles. The high brightness level of the TH-42PH10EK also aids visibility in environments with ambient light, ensuring that presentations remain effective even in well-lit spaces.

Another noteworthy aspect of the Philips TH-42PH10EK is its connectivity options. The display comes equipped with a range of input options, including VGA, HDMI, and composite video, allowing users to connect various devices seamlessly. This versatility makes it easy to integrate the display into different setups, whether for presentations, video conferencing, or media playback.

In terms of durability, the TH-42PH10EK is designed for continuous use, making it ideal for applications that require long operating hours. Its robust build quality ensures that it can withstand the rigors of daily usage in a commercial setting. Additionally, the display features advanced heat management systems, which help maintain optimal performance without overheating.

The aesthetics of the Philips TH-42PH10EK are also notable. Its slim bezel design provides a modern look, allowing it to blend seamlessly into any professional environment while maximizing screen space for content display.

In conclusion, the Philips TH-42PH10EK is a reliable and high-performance plasma display, making it an excellent choice for businesses needing a robust solution for their visual communication needs. With its superior image quality, extensive connectivity options, and durable design, the TH-42PH10EK stands out as a dependable choice in the competitive market of professional displays.
Top Page Image Contents