Philips DVD580M owner manual TV Display

Page 34

34 TV Display

You may set the Player to display video in one of three formats: Letterbox, Pan & Scan, or Wide. The TV Display you select must be available on the DVD. If not, the TV Display setting will not affect the picture.

1 Press SYSTEM MENU.

2 GENERAL SETUP will be selected. Press OK.

3 TV DISPLAY will be selected. Press :.

4 Press 8 or 9 to select NORMAL/PS, NORMAL/LB, or

WIDE, then press OK.

●Select NORMAL/PS (panscan) if you have a regular TV and want both sides of the picture to be trimmed, or formatted to fit your TV screen. This setting is possible only if the DVD contains pan & scan material. Check the DVD case for details.

●Select NORMAL/LB (letterbox) if you have a regular TV and want to see the picture with black bars at the top and bottom of the screen.This looks like the picture you see when watching movies in a theater. This setting is possible only if the DVD con- tains letterbox material. The DVD case may say the DVD is in Letterbox or Widescreen format.

●Select WIDE if you have a widescreen TV.

--- GENERAL PAGE ---

TV DISPLAY	NORMAL/PS
PIC MODE	NORMAL/LB
ANGLE MARK	WIDE
OSD LANG
SCR SAVER
MAIN PAGE

NORMAL TV PAN SCAN

5 Press SYSTEM MENU to remove the menus.

1,5

2-4

Helpful Hint

•Some widescreen TVs may show only part of the Player’s System Menu. This is not an error of the Player settings. Adjust the screen mode on your TV. See your TV owner’s manual for details.

Image 34

Contents DVD580M It to us right now Dear Philips product ownerFor Customer Use Table of Contents Safety Information Safety Information cont’d Introduction Playable Discs Cleaning DiscsPlayable Discs Region CodesBefore you begin HookupsDetermining the best possible connection RememberConnecting to a TV Only TV has a yellow Video In jack Hookups cont’dConnecting to a TV Only TV has an S-Video In Jack Set TV Type accordingly. Details are onConnecting to a TV Only TV has Component Video In Jacks Stereo Example only Back of TV Example only Stereo Receiver Receiver Example only Connecting the Base Putting Batteries in the Remote ControlUsing the Remote Control Remote Sensor IR Horizontal AttachmentQuick Disc Playback TuresVideo SYS system Button Display Button Sound Mode ButtonVolume +/- Buttons DVD y ButtonFront Panel Rear Panel Title/Disc Menus Title/Disc Menus, Chapter/Track SelectionChapter/Track Selection During playback, press Slow FWD to play the Disc for Forward and Reverse SearchingSlow Motion Or, press Slow REV to play the Disc in reverse in slowTime Search Still Picture, Time SearchStill Picture Or, for a Video CD or Audio CD, press Search onceCamera Angle Zoom, Camera AngleZoom Zooming lets you enlarge the video image during playbackRepeat Repeat, Repeat A-BRepeat A-B Audio Language Audio Language, Subtitle LanguageSubtitles Disc Menu Language Press System Menu to remove the menusFavorite Track Selection While playback is stopped, press Program FTSChanging Your Password Parental Control PasswordBox beside OLD Password will be highlighted Parental Control Levels Rating ExplanationsPreview Preview, Playback ControlPlayback Control PBC Following characteristics are not supported MP3 FeaturesMP3 Playback Jpeg Playback TV Type NTSC/PAL TV Type NTSC/PALPress 8 or 9 to choose MULTI, NTSC, or PAL, then TV Display Video Out Picture ModePicture Mode, Video Out Press 9 or 8 to select S-VIDEO or YCBCR, then pressLpcm Output Audio Out, Lpcm OutputAudio Out Audio OUT will be selected. PressDual Mono Dynamic Range CompressionSpeaker Channel Setup You can select a speaker setting only if Downmix is OFFAngle Mark On-Screen Display Language Player’s System MenuPlayer will turn itself off automatically DefaultsScreen Saver Five minutes prior to shutting offHelpful Hints Helpful Hints contd Player does not respond to the remote controlButtons on the Player or remote control do not work Disc will not playGlossary Specifications Limited Warranty Philips, P.O. Box 520890, Miami, FL 33152 402Accessories supplied with the product, Limited Warranty cont’dExchange Fee Ir infrared remote sensor Power y buttonPrev previous button