Philips DVDR72 owner manual Connecting to a TV and a Cable Box or Satellite Receiver

Page 11

Hookups (cont’d) 11

Connecting to a TV and a Cable Box or Satellite Receiver

2

OUTIN

Cable Box or Satellite Receiver

4

ANTENNA

IN

 

 

OUT

 

 

EXT 2

EXT 1

 

 

 

 

VIDEO

AUDIO COMPONENT

 

VIDEO AUDIO

COMPONENT

 

(CVBS)

VIDEO

 

(CVBS)

VIDEO

 

 

V

 

 

V

S-VIDEO

 

 

S-VIDEO

 

 

(Y/C)

L

PB

(Y/C)

L

PB

 

AUDIO

 

 

AUDIO

 

 

R

PR

 

R

PR

TV

 

 

 

 

 

1

Cable TV

or Satellite Signal

DIGITAL

AUDIO OUT

3

Back of TV

 

(example only)

1 Connect your Satellite or Cable TV signal to the ANTENNA IN jack on your Cable Box/Satellite Receiver.

2 If your Cable Box/Satellite Receiver has a single ANTENNA OUT or TO TV jack: Connect the supplied RF coaxial cable to the ANTEN- NA OUT/TO TV jack of the Cable Box/Satellite Receiver and to the ANTENNA jack on the rear of the DVD Recorder.

If your Cable Box/Satellite Receiver has AUDIO/VIDEO OUT jacks: Connect them to the Recorder’s IN EXT 2 VIDEO (CVBS) and AUDIO L/R jacks.These jacks are red and white (AUDIO) and yellow (VIDEO). Use the supplied audio and video cables, which have red/white/yellow markings. Or, use the Recorder’s IN EXT 2 S-VIDEO (Y-C) jack (instead of CVBS) if your Cable Box/Satellite Receiver has an S-Video Out jack.

3 Connect another RF coaxial cable to the Recorder’s TV jack and to the ANTENNA IN or RF IN jack on your TV. Your TV’s Antenna In jack may be labelled RF In or 75 ohm. Check your TV manual for details. Or, use an Audio/Video connection between the Recorder and the TV. See pages 12-14.

4 Connect the supplied power cord to the MAINS (AC Power) jack on the rear of the DVD Recorder.

Connect the power cords of the Recorder, Cable Box/Satellite Receiver, and TV to a power outlet.

5 Press STANDBY/ON y on the front of the Recorder to turn it on.

Set the Recorder to channel 3 or 4 (your Cable Box/Satellite Receiver’s output channel) if you used an RF coaxial cable to connect the Cable Box/Satellite Receiver to the DVD Recorder.

Set the Recorder to EXT 2 if you used those jacks on the Recorder to connect to the Cable Box/Satellite Receiver.

6 Turn on the TV and the Cable Box/Satellite Receiver.

Set the TV to channel 3 to receive the picture from the Recorder (if you used the RF coaxial cable as shown for step 3).

You should see the blue Philips DVD background picture or the Initial Setup screen on the TV. The Initial Setup screen will appear the first time you turn on the Recorder. Go to page 18 to continue.

Helpful Hints

•To watch TV, put the Recorder in Monitor mode and on channel 3 or 4. (Press MONITOR on the Recorder’s remote.) Change TV channels at your Cable Box or Satellite Receiver.

•If “IS TV ON? C03” appears on the display panel, you need to turn on your TV and set it to channel 3. This is part of the Initial Setup. You cannot see the Initial Setup screens until you turn on the TV and have it on the correct Video In channel.

•You may need to use channel 4 at your TV instead. While “IS TV ON? C03” appears on the Recorder’s display panel, press and hold the Number 4 button on the Recorder’s remote. After several seconds, the display will change to “IS TV ON? C04.” Set your TV to channel 4. The Initial Setup screen should appear.

Page 10 Page 12
Image 11
Page 10 Page 12
Contents DVDR72 For Customer Use Dear Philips product ownerRemember, to get the most from your Philips prod Card within 10 days. So please mail It to us right nowContents Safety Information Example of Antenna Grounding per National Electrical Code Safety Information cont’dCause the product and cart combination to over- turn Introduction Discs for Playing Only Playable DiscsDiscs for Recording and Playing Discs Unsuitable for Recording or PlayingGeneral Information Remember HookupsDetermining the best possible connection Before you beginHookups cont’d Connecting to a TV Only TV has only an Antenna In jackConnecting to a TV and a Cable Box or Satellite Receiver Connecting to a TV Only TV has Component Video In Jacks Connecting to a TV Only TV has an S-Video In Jack Turn on the TV power. Set the TV to the correct Audio/Video Connecting to a TV Only TV has a yellow Cvbs Video In jackSet Analog output accordingly. See Cable TV Signal DV S-VIDEO Video Audio Left Right To choose the language you prefer, then press OK Initial SetupInstructions continue on the next Press STANDBYy to turn on the RecorderChoose the preferred TV Shape, then press OK Initial Setup cont’dFrom previous You play the DVD later.While Resume Appears, press Play to Quick Disc PlaybackTo stop play at any time, press Stop C From the DVD’s Disc menu If Auto resume is Off, ResumeQuick Recording Remote Control Remote Control cont’d Front Panel Rear Panel TV Channel Programming Press System MENU. The Installation menu will reappearVCR Plus+ Channels Menu screen, then press to enter the Installation menuYour time zone While storing the settingPress CH-9to choose Daylight Saving. Press or to 11Press System Menu repeatedly to remove all menus Time/Date ManualMenu Bar Menu BarsDisc status icons On-screen Symbols, Status BoxOn-screen Symbols Status BoxDisc Bar Title Settings MenuIndex Picture Screen TitlesTuner Information box Timer Information boxCurrent time no timer recordings are scheduled Information BoxesPress Disc Menu during Disc play Title/Disc Menus, Chapter/Track SelectionTitle/Disc menus Chapter/Track SelectionWithin five seconds, press the Audio Y button repeatedly Audio LanguageSubtitles During DVD play, press the Audio Y buttonDuring play, press System Menu so Menu Bar 1 appears Zoom, Camera AngleZoom Camera AnglePress System Menu during play so Menu Bar 1 appears Still Picture/Frame-by-frame PlaybackSound Forward and Reverse Searching Slow Motion, SearchingSlow Motion Scan Time Search, ScanTime Search Repeat A-B Repeat symbols may appear briefly on the TV screen. SeeRepeat, Repeat A-B RepeatOne-Touch Recording When the Start time is correct, press Timer RecordingFrom your TV guide, then press OK. If you make a mistake Press Timer on the remote controlCH+8 to select VCR Plus+ system, then press Press the Number buttons to enter the PlusCode numberPress Timer repeatedly to remove the menus Erasing Timer RecordingsPress OK to erase the timer recording. Timer Cleared will Timer button.The Timer List will reappearError Messages Record One Channel/Watch Another Press to return to the Index Picture Screen if necessary Title Settings MenuChapter Markers Append recordingRecord Settings Finalize disc Unfinalized DVD+R only Editing Disc Information ScreenErase disc DVD+RW only If you select New Index Picture, press Pause F to Picture Screen will reappear when the action is completeEditing Finalize Disc Press System Menu to remove the menus Playback ControlPress CH-9repeatedly to select Change code, then press Access ControlChange Code Twice.This will set your code for the first timeChild lock will be highlighted. Press Child LockPress again, then press the Number buttons to enter Your four-digit code. See1Insert a Disc Access Control cont’dLocking or Unlocking Specific Discs Screen. Child Lock should be Locked. SeeWill stop. Enter the four-digit code to play the Disc Parental LevelChange Country Access Control contdDVD Recorder Features Menu Recorded in the regular format Picture SettingsDigital output will be selected. Press Digital OutputAnalog Output SAP Language SettingsRemote Control Used Night Mode, Remote Control UsedNight Mode Glossary Helpful Hints Helpful Hints contd Diagnostic Test Disc Formats Supported SpecificationsDVD Recorder Limited WarrantyInformation Index IB8455E001 3139 246
Top Page Image Contents