Philips DVDR72 owner manual Record One Channel/Watch Another

Page 46

46 Record One Channel/Watch Another

1 Press REC/OTR I to record the current TV channel. A red light will encircle the Record I button on the front of the Recorder to indicate recording is in progress. See page 21.

2 Press TV/DVD on the remote to put the Recorder in TV position. TV will appear briefly on the Recorder’s display panel.

3 Use the TV remote control to select the channel you want to watch at the TV. (If you have a Philips TV, you may be able to hold down the DVD/TV button on the side of the remote and use the CH+8 and CH-9buttons to change channels at the TV. See page 23.)

4 To return to the recording, use the TV remote control to reselect the TV channel at which you usually view the DVD Recorder. This may be a Video In channel or channel 3 or 4, depending on how you connected the DVD Recorder to the TV. The channel being recorded will appear on the TV screen.

5 Press TV/DVD on the Recorder’s remote control to return the Recorder to DVD position. DVD will appear briefly on the Recorder’s display panel.

6 To stop recording, press the STOP C button.

 

 

 

STANDBY

 

MONITOR

 

 

2,5

TV / DVD

T / C PLAY MODE REC. MODE

1

2

3

 

4

5

6

 

7

8

9

 

DISC

0

SYSTEM

 

 

MENU

 

 

SELECT

 

OK

 

 

CH

 

 

 

CH

 

 

TIMER

 

 

 

FSS

 

TV VOLUME

 

 

RETURN CLEAR

 

6

 

PLAY

 

I

STOP

I

AUDIOPAUSE

REC/OTR

1

3 Select the channel you want to watch at the TV.

4 Reselect the Video In channel at the TV.

Image 46
Contents DVDR72 Card within 10 days. So please mail It to us right now Dear Philips product ownerRemember, to get the most from your Philips prod For Customer UseContents Safety Information Cause the product and cart combination to over- turn Safety Information cont’dExample of Antenna Grounding per National Electrical Code Introduction Discs Unsuitable for Recording or Playing Playable DiscsDiscs for Recording and Playing Discs for Playing OnlyGeneral Information Before you begin HookupsDetermining the best possible connection RememberConnecting to a TV Only TV has only an Antenna In jack Hookups cont’dConnecting to a TV and a Cable Box or Satellite Receiver Connecting to a TV Only TV has Component Video In Jacks Connecting to a TV Only TV has an S-Video In Jack Connecting to a TV Only TV has a yellow Cvbs Video In jack Turn on the TV power. Set the TV to the correct Audio/VideoSet Analog output accordingly. See Cable TV Signal DV S-VIDEO Video Audio Left Right Press STANDBYy to turn on the Recorder Initial SetupInstructions continue on the next To choose the language you prefer, then press OKFrom previous Initial Setup cont’dChoose the preferred TV Shape, then press OK From the DVD’s Disc menu If Auto resume is Off, Resume Quick Disc PlaybackTo stop play at any time, press Stop C You play the DVD later.While Resume Appears, press Play toQuick Recording Remote Control Remote Control cont’d Front Panel Rear Panel Press System MENU. The Installation menu will reappear TV Channel ProgrammingMenu screen, then press to enter the Installation menu VCR Plus+ ChannelsPress CH-9to choose Daylight Saving. Press or to While storing the settingYour time zone Time/Date Manual 11Press System Menu repeatedly to remove all menusMenu Bars Menu BarStatus Box On-screen Symbols, Status BoxOn-screen Symbols Disc status iconsTitles Title Settings MenuIndex Picture Screen Disc BarInformation Boxes Timer Information boxCurrent time no timer recordings are scheduled Tuner Information boxChapter/Track Selection Title/Disc Menus, Chapter/Track SelectionTitle/Disc menus Press Disc Menu during Disc playDuring DVD play, press the Audio Y button Audio LanguageSubtitles Within five seconds, press the Audio Y button repeatedlyCamera Angle Zoom, Camera AngleZoom During play, press System Menu so Menu Bar 1 appearsSound Still Picture/Frame-by-frame PlaybackPress System Menu during play so Menu Bar 1 appears Slow Motion Slow Motion, SearchingForward and Reverse Searching Time Search Time Search, ScanScan Repeat Repeat symbols may appear briefly on the TV screen. SeeRepeat, Repeat A-B Repeat A-BOne-Touch Recording Timer Recording When the Start time is correct, pressPress the Number buttons to enter the PlusCode number Press Timer on the remote controlCH+8 to select VCR Plus+ system, then press From your TV guide, then press OK. If you make a mistakeTimer button.The Timer List will reappear Erasing Timer RecordingsPress OK to erase the timer recording. Timer Cleared will Press Timer repeatedly to remove the menusError Messages Record One Channel/Watch Another Title Settings Menu Press to return to the Index Picture Screen if necessaryAppend recording Chapter MarkersRecord Settings Erase disc DVD+RW only Editing Disc Information ScreenFinalize disc Unfinalized DVD+R only Editing Picture Screen will reappear when the action is completeIf you select New Index Picture, press Pause F to Finalize Disc Playback Control Press System Menu to remove the menusTwice.This will set your code for the first time Access ControlChange Code Press CH-9repeatedly to select Change code, then pressYour four-digit code. See Child LockPress again, then press the Number buttons to enter Child lock will be highlighted. PressScreen. Child Lock should be Locked. See Access Control cont’dLocking or Unlocking Specific Discs 1Insert a DiscParental Level Will stop. Enter the four-digit code to play the DiscAccess Control contd Change CountryDVD Recorder Features Menu Picture Settings Recorded in the regular formatDigital Output Digital output will be selected. PressAnalog Output Language Settings SAPNight Mode Night Mode, Remote Control UsedRemote Control Used Glossary Helpful Hints Helpful Hints contd Diagnostic Test Specifications Disc Formats SupportedLimited Warranty DVD RecorderInformation Index IB8455E001 3139 246