Philips DVDR72 owner manual Digital Output, Digital output will be selected. Press

Page 61

After connecting the Recorder to your TV and other equipment, you may need to change the Recorder’s Digital Output setting. Look to see which Recorder audio jacks you connected to your other equipment, then set Digital Output accordingly.The information in step 4 will help you decide. Adjust Digital Output only if you used the Recorder’s Coaxial DIGITAL AUDIO OUT jack. (If you used the white/red OUT AUDIO L/R jacks, set Digital Output to Off. See page 62 to adjust the sound at Analog Output.)

1 Press SYSTEM MENU. Press ; to select in the top left corner of the menu bar at the top of the TV screen.

2 Press CH-9repeatedly to select G, then press :.

3 Digital output will be selected. Press :.

4 Press CH+8 or CH-9to select Off, PCM only, or All, then press OK.

●Select All if you connected the Recorder’s Coaxial DIGITAL AUDIO OUT jack to a Stereo that has a built-in multi-channel decoder. See page 16.

●Select Off if you did not use the Coaxial DIGITAL AUDIO OUT jack.

●Select PCM only if you used the Recorder’s Coaxial DIGITAL AUDIO OUT jack for connections, but your Stereo does not include a built-in digital multi-channel decoder. PCM represents Pulse Code Modulation.

	W	X	Y	Z	a
~	1	2	1en	off no	off
					Sound
G	Digital output			s Off
G	Analog output			PCM only	K
	Analog output			PCM only	K
r	Night mode			All	L
	Night mode			All

5 Press SYSTEM MENU to remove the menus.

Digital Output 61

STANDBY

MONITOR

TV / DVD

T / C PLAY MODE REC. MODE

1 2 3

4 5 6

7 8 9 1,5

DISC0 SYSTEM

	MENU
SELECT	OK

CH1-4

CH

TIMER

FSS	TV VOLUME
RETURN	CLEAR
PLAY
STOP
I	I

AUDIOPAUSE

REC/OTR

Image 61

Contents DVDR72 Remember, to get the most from your Philips prod Dear Philips product ownerCard within 10 days. So please mail It to us right now For Customer UseContents Safety Information Cause the product and cart combination to over- turn Safety Information cont’dExample of Antenna Grounding per National Electrical Code Introduction Discs for Recording and Playing Playable DiscsDiscs Unsuitable for Recording or Playing Discs for Playing OnlyGeneral Information Determining the best possible connection HookupsBefore you begin RememberHookups cont’d Connecting to a TV Only TV has only an Antenna In jackConnecting to a TV and a Cable Box or Satellite Receiver Connecting to a TV Only TV has Component Video In Jacks Connecting to a TV Only TV has an S-Video In Jack Turn on the TV power. Set the TV to the correct Audio/Video Connecting to a TV Only TV has a yellow Cvbs Video In jackSet Analog output accordingly. See Cable TV Signal DV S-VIDEO Video Audio Left Right Instructions continue on the next Initial SetupPress STANDBYy to turn on the Recorder To choose the language you prefer, then press OKFrom previous Initial Setup cont’dChoose the preferred TV Shape, then press OK To stop play at any time, press Stop C Quick Disc PlaybackFrom the DVD’s Disc menu If Auto resume is Off, Resume You play the DVD later.While Resume Appears, press Play toQuick Recording Remote Control Remote Control cont’d Front Panel Rear Panel TV Channel Programming Press System MENU. The Installation menu will reappearVCR Plus+ Channels Menu screen, then press to enter the Installation menuPress CH-9to choose Daylight Saving. Press or to While storing the settingYour time zone 11Press System Menu repeatedly to remove all menus Time/Date ManualMenu Bar Menu BarsOn-screen Symbols On-screen Symbols, Status BoxStatus Box Disc status iconsIndex Picture Screen Title Settings MenuTitles Disc BarCurrent time no timer recordings are scheduled Timer Information boxInformation Boxes Tuner Information boxTitle/Disc menus Title/Disc Menus, Chapter/Track SelectionChapter/Track Selection Press Disc Menu during Disc playSubtitles Audio LanguageDuring DVD play, press the Audio Y button Within five seconds, press the Audio Y button repeatedlyZoom Zoom, Camera AngleCamera Angle During play, press System Menu so Menu Bar 1 appearsSound Still Picture/Frame-by-frame PlaybackPress System Menu during play so Menu Bar 1 appears Slow Motion Slow Motion, SearchingForward and Reverse Searching Time Search Time Search, ScanScan Repeat, Repeat A-B Repeat symbols may appear briefly on the TV screen. SeeRepeat Repeat A-BOne-Touch Recording When the Start time is correct, press Timer RecordingCH+8 to select VCR Plus+ system, then press Press Timer on the remote controlPress the Number buttons to enter the PlusCode number From your TV guide, then press OK. If you make a mistakePress OK to erase the timer recording. Timer Cleared will Erasing Timer RecordingsTimer button.The Timer List will reappear Press Timer repeatedly to remove the menusError Messages Record One Channel/Watch Another Press to return to the Index Picture Screen if necessary Title Settings MenuChapter Markers Append recordingRecord Settings Erase disc DVD+RW only Editing Disc Information ScreenFinalize disc Unfinalized DVD+R only Editing Picture Screen will reappear when the action is completeIf you select New Index Picture, press Pause F to Finalize Disc Press System Menu to remove the menus Playback ControlChange Code Access ControlTwice.This will set your code for the first time Press CH-9repeatedly to select Change code, then pressPress again, then press the Number buttons to enter Child LockYour four-digit code. See Child lock will be highlighted. PressLocking or Unlocking Specific Discs Access Control cont’dScreen. Child Lock should be Locked. See 1Insert a DiscWill stop. Enter the four-digit code to play the Disc Parental LevelChange Country Access Control contdDVD Recorder Features Menu Recorded in the regular format Picture SettingsDigital output will be selected. Press Digital OutputAnalog Output SAP Language SettingsNight Mode Night Mode, Remote Control UsedRemote Control Used Glossary Helpful Hints Helpful Hints contd Diagnostic Test Disc Formats Supported SpecificationsDVD Recorder Limited WarrantyInformation Index IB8455E001 3139 246