Philips DVDR72 owner manual Connecting to a TV Only TV has Component Video In Jacks

Page 12

12 Hookups (cont’d)

Connecting to a TV Only

TV has Component Video In Jacks

Back of TV

(example only)

4

RIGHT

PR

AUDIO IN

CR

LEFT

PB

AUDIO IN

CB

 

Y

5

ANTENNA

IN

 

OUT

 

 

EXT 2

EXT 1

 

 

 

VIDEO

AUDIO COMPONENT

VIDEO AUDIO

COMPONENT

 

(CVBS)

VIDEO

(CVBS)

VIDEO

 

 

Y

S-VIDEO

 

S-VIDEO

(Y/C)

L

(Y/C)

 

PB

 

AUDIO

AUDIO

 

R

PR

TV

3

1

Y

PB

PR

DIGITAL

AUDIO OUT

2

Antenna or

Cable TV Signal

1 Connect your Antenna or Cable TV signal to the ANTENNA jack on the rear of the DVD Recorder.

2 Connect the Recorder’s OUT COMPONENT VIDEO (Y PB PR) jacks to the TV’s COMPONENT VIDEO IN jacks. Use the supplied three-strand component video cable, which has red, blue, and green markings. Match the cable colors to the jack colors.

3 Connect the Recorder’s white/red OUT AUDIO L/R (left/right) jacks to the TV’s left/right AUDIO IN jacks. Use a supplied two-strand audio cable, which has red and white markings. Match cable colors to jack colors.

4 Connect the supplied RF coaxial cable to the Recorder’s TV jack and to the Antenna In jack on your TV. Your TV’s Antenna In jack may be labelled RF In,Antenna In, or 75 ohm. Check your TV’s manual for details.

5 Connect the supplied power cord to the MAINS (AC Power) jack on the rear of the DVD Recorder.

Connect the power cords of the Recorder and the TV to a power outlet.

6 Press STANDBY-ON y on the front of the Recorder to turn it on. If “IS TV ON? CO3” appears on the display panel, you need to turn on your TV and set it to the correct Component Video In channel. (See next step.) This is part of the Initial Setup of the Recorder. You cannot see the Initial Setup screens until you turn on the TV and have it on the correct Component Video In channel.

7 Turn on the TV power. Set the TV to the Component Video In chan- nel. It is not channel 3 or 4 when you use Component Video. See your TV owner’s manual for details. Your TV remote may have a button or switch that selects the Component Video In channel. Or, go to your lowest TV channel and change channels down until you see the DVD background picture or Initial Setup screen on the TV. The Initial Setup screen will appear the first time you turn on the Recorder. Go to page 18 to continue.

Helpful Hints

If your TV has Progressive Scan, connect the Recorder’s

OUT COMPONENT VIDEO (Y PB PR) jacks to the TV’s Progressive Scan In jacks instead. Progressive Scan pro- duces a clearer picture by dou- bling the number of visible pic- ture lines per field, providing a jitter-free, sharp, quiet picture. Check your TV manual for details.

Set the Recorder’s Video output to Progressive Scan. See page 60.

On the TV, the Component Video In jacks may be labeled YUV or Pr/Cr Pb/Cb Y and may be green, blue, and red.

Image 12
Contents DVDR72 Dear Philips product owner Remember, to get the most from your Philips prodCard within 10 days. So please mail It to us right now For Customer UseContents Safety Information Safety Information cont’d Cause the product and cart combination to over- turnExample of Antenna Grounding per National Electrical Code Introduction Playable Discs Discs for Recording and PlayingDiscs Unsuitable for Recording or Playing Discs for Playing OnlyGeneral Information Hookups Determining the best possible connectionBefore you begin RememberConnecting to a TV Only TV has only an Antenna In jack Hookups cont’dConnecting to a TV and a Cable Box or Satellite Receiver Connecting to a TV Only TV has Component Video In Jacks Connecting to a TV Only TV has an S-Video In Jack Connecting to a TV Only TV has a yellow Cvbs Video In jack Turn on the TV power. Set the TV to the correct Audio/VideoSet Analog output accordingly. See Cable TV Signal DV S-VIDEO Video Audio Left Right Initial Setup Instructions continue on the nextPress STANDBYy to turn on the Recorder To choose the language you prefer, then press OKInitial Setup cont’d From previousChoose the preferred TV Shape, then press OK Quick Disc Playback To stop play at any time, press Stop CFrom the DVD’s Disc menu If Auto resume is Off, Resume You play the DVD later.While Resume Appears, press Play toQuick Recording Remote Control Remote Control cont’d Front Panel Rear Panel Press System MENU. The Installation menu will reappear TV Channel ProgrammingMenu screen, then press to enter the Installation menu VCR Plus+ ChannelsWhile storing the setting Press CH-9to choose Daylight Saving. Press or toYour time zone Time/Date Manual 11Press System Menu repeatedly to remove all menusMenu Bars Menu BarOn-screen Symbols, Status Box On-screen SymbolsStatus Box Disc status iconsTitle Settings Menu Index Picture ScreenTitles Disc BarTimer Information box Current time no timer recordings are scheduledInformation Boxes Tuner Information boxTitle/Disc Menus, Chapter/Track Selection Title/Disc menusChapter/Track Selection Press Disc Menu during Disc playAudio Language SubtitlesDuring DVD play, press the Audio Y button Within five seconds, press the Audio Y button repeatedlyZoom, Camera Angle ZoomCamera Angle During play, press System Menu so Menu Bar 1 appearsStill Picture/Frame-by-frame Playback SoundPress System Menu during play so Menu Bar 1 appears Slow Motion, Searching Slow MotionForward and Reverse Searching Time Search, Scan Time SearchScan Repeat symbols may appear briefly on the TV screen. See Repeat, Repeat A-BRepeat Repeat A-BOne-Touch Recording Timer Recording When the Start time is correct, pressPress Timer on the remote control CH+8 to select VCR Plus+ system, then pressPress the Number buttons to enter the PlusCode number From your TV guide, then press OK. If you make a mistakeErasing Timer Recordings Press OK to erase the timer recording. Timer Cleared willTimer button.The Timer List will reappear Press Timer repeatedly to remove the menusError Messages Record One Channel/Watch Another Title Settings Menu Press to return to the Index Picture Screen if necessaryAppend recording Chapter MarkersRecord Settings Editing Disc Information Screen Erase disc DVD+RW onlyFinalize disc Unfinalized DVD+R only Picture Screen will reappear when the action is complete EditingIf you select New Index Picture, press Pause F to Finalize Disc Playback Control Press System Menu to remove the menusAccess Control Change CodeTwice.This will set your code for the first time Press CH-9repeatedly to select Change code, then pressChild Lock Press again, then press the Number buttons to enterYour four-digit code. See Child lock will be highlighted. PressAccess Control cont’d Locking or Unlocking Specific DiscsScreen. Child Lock should be Locked. See 1Insert a DiscParental Level Will stop. Enter the four-digit code to play the DiscAccess Control contd Change CountryDVD Recorder Features Menu Picture Settings Recorded in the regular formatDigital Output Digital output will be selected. PressAnalog Output Language Settings SAPNight Mode, Remote Control Used Night ModeRemote Control Used Glossary Helpful Hints Helpful Hints contd Diagnostic Test Specifications Disc Formats SupportedLimited Warranty DVD RecorderInformation Index IB8455E001 3139 246