Philips DVDR72 owner manual Editing Disc Information Screen, Erase disc DVD+RW only

Page 50

50 Editing: Disc Information Screen

You can change Disc settings for a DVD+RW or unfinalized DVD+R from the Disc Information Screen.

1 When in the Index Picture Screen, press STOP C to select the first Title on the DVD+RW/DVD+R.

2 Press CH+8 to enter the Disc Information Screen.

In the Disc Information Screen, press : to enter the

Settings menu. This action is not possible if a finalized DVD+R is

3 in the Recorder.

 

Settings for XXXXXX

 

sL 01Disc name

B sample

Protection

Unprotected

Erase disc

 

DVD+RW example

4 Press CH+8 or CH-9to select Disc name, Protection,

Erase disc (DVD+RW only), or Finalize disc (unfinalized DVD+R only). Proceed according to the feature you chose.

●Disc name (DVD+RW and DVD+R)

Press :. Press ; or : to choose the character position, then press CH+8 or CH-9to enter a character. Press SELECT to alternate between capital and lower case characters. Press CLEAR to erase a character (the space will remain). Repeat this process until you enter the complete name. To save the name, press OK. “Storing name” will appear briefly.

●Protection (DVD+RW and DVD+R)

Press :. Press CH+8 or CH-9to select Protected or

Unprotected, then press OK.

If you choose Protected, you cannot change the Disc, including recording or editing. “Disc locked” will appear on the TV briefly. To edit or record again, select Unprotected.

Remember, protecting a DVD+R is not the same as finalizing it. Finalization cannot be undone.

●Erase disc (DVD+RW only)

Press OK. “This will erase all titles Press OK to confirm” will appear. Press OK again to begin erasing. (If you decide not to erase the Disc, press ;.) “Erasing disc” appears until erasing is com- plete.When the Disc is erased, the Index Picture Screen will reap- pear, showing the free space on the Disc.

●Finalize disc (Unfinalized DVD+R only)

Press OK. “Finalizing disc” will appear until finalization is complete. This may take a few minutes.Then, the Index Picture Screen will reappear. You cannot unfinalize a DVD+R, and you cannot record or edit the DVD+R after you finalize it.

A DVD+R will play on other DVD Players only after the Disc is finalized.

5 If necessary, press ; when you are finished and want to return to the Disc Information Screen. Press CH-9to return to the Index Picture Screen.

STANDBY

MONITOR

TV / DVD

T / C PLAY MODE REC. MODE

1 2 3

4 5 6

7 8 9

DISC

0

SYSTEM

 

 

MENU

2-5

SELECT

 

OK

 

 

 

CH

 

 

 

CH

 

 

TIMER

 

 

 

FSS

 

TV VOLUME

 

 

RETURN

CLEAR

 

 

PLAY

 

 

STOP

1

I

 

I

AUDIO

 

PAUSE

REC/OTR

Helpful Hints

•For information on the Index Picture Screen, see page 32.

•These settings are not change- able for a finalized DVD+R.

•If a DVD+R was recorded on a different DVD Recorder, the set- tings may not be accessible.

•A disc name may contain a

maximum of 64 characters.

Page 49 Page 51
Image 50
Page 49 Page 51
Contents DVDR72 Card within 10 days. So please mail It to us right now Dear Philips product ownerRemember, to get the most from your Philips prod For Customer UseContents Safety Information Example of Antenna Grounding per National Electrical Code Safety Information cont’dCause the product and cart combination to over- turn Introduction Discs Unsuitable for Recording or Playing Playable DiscsDiscs for Recording and Playing Discs for Playing OnlyGeneral Information Before you begin HookupsDetermining the best possible connection RememberConnecting to a TV Only TV has only an Antenna In jack Hookups cont’dConnecting to a TV and a Cable Box or Satellite Receiver Connecting to a TV Only TV has Component Video In Jacks Connecting to a TV Only TV has an S-Video In Jack Connecting to a TV Only TV has a yellow Cvbs Video In jack Turn on the TV power. Set the TV to the correct Audio/VideoSet Analog output accordingly. See Cable TV Signal DV S-VIDEO Video Audio Left Right Press STANDBYy to turn on the Recorder Initial SetupInstructions continue on the next To choose the language you prefer, then press OKChoose the preferred TV Shape, then press OK Initial Setup cont’dFrom previous From the DVD’s Disc menu If Auto resume is Off, Resume Quick Disc PlaybackTo stop play at any time, press Stop C You play the DVD later.While Resume Appears, press Play toQuick Recording Remote Control Remote Control cont’d Front Panel Rear Panel Press System MENU. The Installation menu will reappear TV Channel ProgrammingMenu screen, then press to enter the Installation menu VCR Plus+ ChannelsYour time zone While storing the settingPress CH-9to choose Daylight Saving. Press or to Time/Date Manual 11Press System Menu repeatedly to remove all menusMenu Bars Menu BarStatus Box On-screen Symbols, Status BoxOn-screen Symbols Disc status iconsTitles Title Settings MenuIndex Picture Screen Disc BarInformation Boxes Timer Information boxCurrent time no timer recordings are scheduled Tuner Information boxChapter/Track Selection Title/Disc Menus, Chapter/Track SelectionTitle/Disc menus Press Disc Menu during Disc playDuring DVD play, press the Audio Y button Audio LanguageSubtitles Within five seconds, press the Audio Y button repeatedlyCamera Angle Zoom, Camera AngleZoom During play, press System Menu so Menu Bar 1 appearsPress System Menu during play so Menu Bar 1 appears Still Picture/Frame-by-frame PlaybackSound Forward and Reverse Searching Slow Motion, SearchingSlow Motion Scan Time Search, ScanTime Search Repeat Repeat symbols may appear briefly on the TV screen. SeeRepeat, Repeat A-B Repeat A-BOne-Touch Recording Timer Recording When the Start time is correct, pressPress the Number buttons to enter the PlusCode number Press Timer on the remote controlCH+8 to select VCR Plus+ system, then press From your TV guide, then press OK. If you make a mistakeTimer button.The Timer List will reappear Erasing Timer RecordingsPress OK to erase the timer recording. Timer Cleared will Press Timer repeatedly to remove the menusError Messages Record One Channel/Watch Another Title Settings Menu Press to return to the Index Picture Screen if necessaryAppend recording Chapter MarkersRecord Settings Finalize disc Unfinalized DVD+R only Editing Disc Information ScreenErase disc DVD+RW only If you select New Index Picture, press Pause F to Picture Screen will reappear when the action is completeEditing Finalize Disc Playback Control Press System Menu to remove the menusTwice.This will set your code for the first time Access ControlChange Code Press CH-9repeatedly to select Change code, then pressYour four-digit code. See Child LockPress again, then press the Number buttons to enter Child lock will be highlighted. PressScreen. Child Lock should be Locked. See Access Control cont’dLocking or Unlocking Specific Discs 1Insert a DiscParental Level Will stop. Enter the four-digit code to play the DiscAccess Control contd Change CountryDVD Recorder Features Menu Picture Settings Recorded in the regular formatDigital Output Digital output will be selected. PressAnalog Output Language Settings SAPRemote Control Used Night Mode, Remote Control UsedNight Mode Glossary Helpful Hints Helpful Hints contd Diagnostic Test Specifications Disc Formats SupportedLimited Warranty DVD RecorderInformation Index IB8455E001 3139 246
Top Page Image Contents