Philips DVDR72 owner manual Quick Recording

Page 21

Quick Recording 21

OPEN/CLOSE

STANDBY-ON

OPEN 4

1-2

The Recorder can record TV programming onto a DVD+RW or DVD+R. Before you begin, set up TV channels. See pages 18-19 and 26. Use an unprotected, unfinal- ized, recordable DVD+RW/DVD+R. Recording options are on pages 41-52.

1 Press OPEN/CLOSE A on the front of the Recorder to open the disc tray. Or, press and hold STOP C on the remote control for about three seconds to open or close the Disc tray.

2 Insert a recordable DVD+RW/DVD+R, with the label facing up. Press OPEN/CLOSE A to close the disc tray.The Index Picture Screen will appear. See page 32. If the Disc is empty and has no recordings,“EMPTY DISC” will appear on the display panel.

7

3 Press CH-9to select an empty Title box on a DVD+RW. To avoid overwriting previous recordings on a DVD+RW, choose the last Empty Title box.

On a DVD+R, the Recorder automatically starts recording at the end of the Disc, so you do not need to select an Empty Title box.You cannot overwrite recordings on a DVD+R.

4 Press MONITOR to see TV channels through the DVD Recorder.

5 Press CH+8, CH-9, or the Number buttons to select the channel you wish to record.

To record material playing on equipment you connected to the Recorder, select EXT1, EXT2, CAM1, or CAM2. Choose the EXT (External) or CAM (Camera) channel that matches the jack to which you connected the other equipment. See page 17.

If you are using a Cable Box/Satellite Receiver, set the DVD Recorder to chan- nel 3 or 4 (or the EXT or CAM channel). Choose the output channel of your Cable Box/Satellite Receiver or the jacks to which you connected the Cable Box/Satellite Receiver.Then, change TV channels at the Cable Box/Satellite Receiver. See page 11.

6 Press REC/OTR I to record the selected channel. Recording will begin after a few seconds. (The Disc has to prepare for recording.) A red light will encircle the Record I button on the front of the Recorder during recording. To pause recording, press PAUSE k once on the remote.The red light around the Record I button will flash when recording is paused.

7 Press STOP C to stop recording.The red light around the Record I button will flash.The Index Picture Screen will reappear after a few seconds. On a brief recording on a new DVD+RW, formatting the Disc will take a minute.

If you plan to play a DVD+R on another DVD Player, finalize the Disc. Follow the steps on page 52.You cannot record or edit a DVD+R after you finalize it.

To edit your recordings, see page 51. However, editing changes may not be accessible when you play the Disc on other DVD Players.

STANDBY

MONITOR

TV / DVD

T / C PLAY MODE REC. MODE

1 2 3

4 5 6 5

7 8 9

DISC

0

 

SYSTEM

 

 

MENU

 

3,5

SELECT

 

 

OK

 

 

 

 

CH

 

 

 

 

CH

 

 

 

TIMER

 

 

 

 

FSS

 

 

TV VOLUME

 

 

RETURN

CLEAR

 

 

 

PLAY

 

 

 

STOP

 

 

I

 

 

I

 

AUDIO

 

 

PAUSE

6

 

REC/OTR

 

Helpful Hints

•You cannot record only Audio (sound) to a DVD+RW/DVD+R. You must record both audio and video (sound and picture).

•To erase a recording, see “Erase this title” details on page 47.

•You cannot duplicate copyright- ed DVDs, videotapes, or TV broadcasts using the Recorder. “COPY PROTECT” may appear on the display panel if you

attempt this.

Page 20 Page 22
Image 21
Page 20 Page 22
Contents DVDR72 Remember, to get the most from your Philips prod Dear Philips product ownerCard within 10 days. So please mail It to us right now For Customer UseContents Safety Information Safety Information cont’d Cause the product and cart combination to over- turnExample of Antenna Grounding per National Electrical Code Introduction Discs for Recording and Playing Playable DiscsDiscs Unsuitable for Recording or Playing Discs for Playing OnlyGeneral Information Determining the best possible connection HookupsBefore you begin RememberHookups cont’d Connecting to a TV Only TV has only an Antenna In jackConnecting to a TV and a Cable Box or Satellite Receiver Connecting to a TV Only TV has Component Video In Jacks Connecting to a TV Only TV has an S-Video In Jack Turn on the TV power. Set the TV to the correct Audio/Video Connecting to a TV Only TV has a yellow Cvbs Video In jackSet Analog output accordingly. See Cable TV Signal DV S-VIDEO Video Audio Left Right Instructions continue on the next Initial SetupPress STANDBYy to turn on the Recorder To choose the language you prefer, then press OKInitial Setup cont’d From previousChoose the preferred TV Shape, then press OK To stop play at any time, press Stop C Quick Disc PlaybackFrom the DVD’s Disc menu If Auto resume is Off, Resume You play the DVD later.While Resume Appears, press Play toQuick Recording Remote Control Remote Control cont’d Front Panel Rear Panel TV Channel Programming Press System MENU. The Installation menu will reappearVCR Plus+ Channels Menu screen, then press to enter the Installation menuWhile storing the setting Press CH-9to choose Daylight Saving. Press or toYour time zone 11Press System Menu repeatedly to remove all menus Time/Date ManualMenu Bar Menu BarsOn-screen Symbols On-screen Symbols, Status BoxStatus Box Disc status iconsIndex Picture Screen Title Settings MenuTitles Disc BarCurrent time no timer recordings are scheduled Timer Information boxInformation Boxes Tuner Information boxTitle/Disc menus Title/Disc Menus, Chapter/Track SelectionChapter/Track Selection Press Disc Menu during Disc playSubtitles Audio LanguageDuring DVD play, press the Audio Y button Within five seconds, press the Audio Y button repeatedlyZoom Zoom, Camera AngleCamera Angle During play, press System Menu so Menu Bar 1 appearsStill Picture/Frame-by-frame Playback SoundPress System Menu during play so Menu Bar 1 appears Slow Motion, Searching Slow MotionForward and Reverse Searching Time Search, Scan Time SearchScan Repeat, Repeat A-B Repeat symbols may appear briefly on the TV screen. SeeRepeat Repeat A-BOne-Touch Recording When the Start time is correct, press Timer RecordingCH+8 to select VCR Plus+ system, then press Press Timer on the remote controlPress the Number buttons to enter the PlusCode number From your TV guide, then press OK. If you make a mistakePress OK to erase the timer recording. Timer Cleared will Erasing Timer RecordingsTimer button.The Timer List will reappear Press Timer repeatedly to remove the menusError Messages Record One Channel/Watch Another Press to return to the Index Picture Screen if necessary Title Settings MenuChapter Markers Append recordingRecord Settings Editing Disc Information Screen Erase disc DVD+RW onlyFinalize disc Unfinalized DVD+R only Picture Screen will reappear when the action is complete EditingIf you select New Index Picture, press Pause F to Finalize Disc Press System Menu to remove the menus Playback ControlChange Code Access ControlTwice.This will set your code for the first time Press CH-9repeatedly to select Change code, then pressPress again, then press the Number buttons to enter Child LockYour four-digit code. See Child lock will be highlighted. PressLocking or Unlocking Specific Discs Access Control cont’dScreen. Child Lock should be Locked. See 1Insert a DiscWill stop. Enter the four-digit code to play the Disc Parental LevelChange Country Access Control contdDVD Recorder Features Menu Recorded in the regular format Picture SettingsDigital output will be selected. Press Digital OutputAnalog Output SAP Language SettingsNight Mode, Remote Control Used Night ModeRemote Control Used Glossary Helpful Hints Helpful Hints contd Diagnostic Test Disc Formats Supported SpecificationsDVD Recorder Limited WarrantyInformation Index IB8455E001 3139 246
Top Page Image Contents