Getting Started
If the progressive function is activated but your TV does not support progressive scan or the cables are not connected accordingly, the TV screen will be blank. You can deactivate progressive scan as below.
1 Press STANDBY ON B on the front panel to switch on the DVD player.
2 Press OPEN/CLOSE / on the front panel to open the disc tray.
3 Press STOP 9 on the front panel.
4 Press PLAY/PAUSE 2; on the front panel.
➜The blue Philips DVD background appears on the TV screen.
Selecting the color system that corresponds to your TV
This DVD Player is compatible with both NTSC and PAL. In order for a DVD to play on this Player, the color system of the Disc, the TV and the DVD Player should match.
- - VIDEO SETUP PAGE - -
TV STANDARD |
| MULTI |
TV DISPLAY |
| NTSC |
CLOSED CAPTIONS |
| PAL |
VIDEO OUTPUT |
|
|
PROGRESSIVE |
|
|
SMART PICTURE |
|
|
MAIN PAGE
1Press SYSTEM MENU.
2 Press 4 3 to select ‘Video Setup Page’.
3 Enter its submenu by pressing OK.
4 Use the 1 2 3 4 keys on the Remote Control to navigate in the menu.
Move to ‘TV Standard’ and press B.
PAL – Select this if the connected TV has the PALcolor system. It will change the video signal of an NTSC disc and output it in PAL format.
NTSC – Select this if the connected TV has the NTSC color system. It will change the video signal of a PAL disc (VCD only) and output it in NTSC format.
Multi – Select this if the connected TV is compatible with both NTSC and PAL
Helpful Hint:
–Before changing the current TV Standard setting, determine the color system of your TV
–If there is not a proper picture on your TV, wait for 15 seconds for auto recover.
- - REFER TO THE OWNER'S MANUAL - -
Changing MULTI to PAL
1.Ensure your TV supports PAL
2.If there is a blank screen on normal TV wait 15 seconds for auto recover
| OK |
| CANCEL |
|
|
|
|
1 2 - Move | OK - Select | ||
- - REFER TO THE OWNER'S MANUAL - -
Confirm again to use PAL
If picture is good, press OK button on remote control
| OK |
|
| CANCEL |
|
|
|
| |
TO GO BACK TO MULTI | ||||
1. Open tray, |
|
| ||
2. Press '3' Key |
|
| ||
. |
|
| OK - Select | |
1 2 - Move | ||||