Philips SL-0347/17-1, DVP640/17 warranty Connections, Connecting the power cord

Connections

Using an accessory RF modulator (cont’d)

3 Use an RF coaxial cable (not supplied) to connect ANTENNA OUT or TO TV jack of the RF modulator to the ANTENNA IN jack on the TV.

4Connect the Antenna or Cable TV service signal to the ANTENNA IN or RF IN jack on the RF modulator. (It may have been connected to your TV previously. Disconnect it from the TV).

5 Set the CH3/4 switch on the RF modulator to 3 or 4. Set your TV to the same channel.

Connecting the power cord

		COMPONENT
	S-VIDEO	VIDEO IN
AUDIO	IN	V (Pr/Cr)
OUT
		U (Pb/Cb)
	VIDEO IN
		Y
			VIDEO
		L	OUT
		R
		AUDIO OUT	S

After everything is connected properly, plug the AC power cord into the power outlet.

Never make or change any connections with the power switched on.

When no disc is loaded, press

STANDBY ON on the DVD Player to turn it on.

“NO DISC” may appear on the display panel.

OPEN/CLOSE NO DISC STOP PLAY/PAUSE