Audio Setup Menu, Downmix, Digital Output

Press OK, then press 1 to return to the Audio Setup Page.

Helpful Hint:

– The average setting for most Discs is 48K.

Enter its submenu by pressing 2.

Press 34 to highlight ‘LPCM Output’.

3 Press 34 to choose a setting.

➜ 48K: Play a disc recorded at the sampling rate of 48 kHz.

➜ 96K: Play a disc recorded at the sampling rate of 96 kHz.

4 Press OK, then press 1 to return to the Audio Setup Page.

Helpful Hint:

– If DIGITAL OUTPUT is set to ‘All’, all audio settings except MUTE are invalid.

LPCM Output

If you connect the DVD Player to a PCM compatible receiver using Player’s Digital (Coaxial or Optical) jack, you may need to adjust ‘LPCM Output’.

Discs are recorded at a certain sampling rate, measured in kHz.The higher the sampling rate, the better the sound quality.

- - AUDIO SETUP PAGE - -

DOWNMIX

DIGITAL OUTPUT

LPCM OUTPUT 96K

SOUND MODE 48K REVERB MODE

D.R.C

MAIN PAGE

Enter its submenu by pressing 2.

Press 34 to highlight ‘Digital Output’.

3 Press 34 to choose a setting.

➜ All: If you connected the DVD Player’s Digital (Coaxial or Optical) jack to a multi-channel decoder/receiver.

➜ PCM Only: Only if your receiver is not capable of decoding multi-channel audio.

DVD Menu Options

Audio Setup Menu

The options in the Audio Setup menu are: ‘Downmix’,‘Digital Output’,‘LPCM Output’,‘Sound Mode’,‘Reverb Mode’ and ‘D.R.C. (Dynamic Range Control)’.

2Press 3 4 to select the ‘Audio Setup’ page.

3 Press OK to confirm.

- - AUDIO SETUP PAGE - -

1Press the 34 keys to highlight ‘Downmix’.

2 Enter its submenu by pressing 2.

3Press 34 to choose a setting.

➜LT/RT: Select this option if your DVD Player is connected to a Stereo with a Dolby Pro Logic decoder.

➜Stereo: Select this option if the TV or Stereo has right and left Audio In jacks but does not have Dolby Pro Logic.

4Press OK, then press 1 to return to the Audio Setup Page.

Set Digital output according to the optional audio equipment you connected.

- - AUDIO SETUP PAGE - -