DVD Menu Options
Video Output
Choose the type of video output that matches the connection of the DVD Player to your TV.
- - VIDEO SETUP PAGE - -
TV STANDARD |
|
|
TV DISPLAY |
|
|
CLOSED CAPTIONS |
|
|
VIDEO OUTPUT |
| |
PROGRESSIVE |
| YPbPr |
SMART PICTURE |
| RGB |
|
|
|
MAIN PAGE |
|
|
Progressive
To select this item you must set ‘Video Output’ to YPbPr (see left) and ensure your TV has progressive scan.
- - VIDEO SETUP PAGE - -
TV STANDARD
TV DISPLAY
CLOSED CAPTIONS
VIDEO OUTPUT |
|
|
PROGRESSIVE |
| ON |
SMART PICTURE |
| OFF |
1Press 34 to highlight ‘Video Output’.
2 Enter its submenu by pressing 2.
3Press 34 to choose a setting.
➜
➜YPbPr: If you have connected the YPbPr Out jacks to a TV.
➜RGB: If you have connected the RGB out jack to a TV.
4Press OK, then press 1 to return to the Video Setup Page.
1Press 34 to highlight ‘Progressive’.
2 Enter its submenu by pressing 2.
3Press 34 to choose a setting.
➜On: Enable Progressive Scan video.
➜Off: Disable Progressive Scan video.
4Press OK, then press 1 to return to the Video Setup Page.
Helpful Hint:
–If a blank/distorted TV screen appears, wait for 15 seconds for auto recover.
–To deactivate the progressive function, refer to the hint menu displayed on the TV screen or see pages 15 and 16.
- - REFER TO THE OWNER'S MANUAL - -
ACTIVATING PROGRESSIVE:
1.Ensure your TV has progressive
2.Connect with YPbPr (GBR) video
3.If there is a blank screen on normal wait 15 seconds for auto recover
| OK |
| CANCEL |
2 3 - Move | OK - Select | ||
- - REFER TO THE OWNER'S MANUAL - -
Confirm again to use progressive scan
If picture is good, press OK button on remote control
OK |
| CANCEL |
|
|
|
To deactivate progressive:
1.Open tray,
2.Press '1' Key.
2 3 - Move | OK - Select |