CONNECTIONS
CONNECT TO A DOLBY DIGITAL DECODER,
DTS DECODER, OR MPEG DECODER
For DVD playback, If available on the DVD disc this unit outputs a Dolby Digital, DTS, or MPEG data stream from its COAXIAL DIGITAL AUDIO OUT connector. By connecting the player to a Dolby Digital, DTS decoder, or MPEG decoder, you can enjoy a more convincing, realistic sound of a professional standard such as can be heard in a cinema.
Use an audio coaxial digital cable or an audio optical cable (available from your dealer) for the audio connec- tion.
•If you use the OPTICAL connector, remove the protective cap.
to 21-Pin Scart connector
OR | To Y/C OUTPUT | To SCART1 connector |
| connector |
|
| To Y/C INPUT connector |
|
| IN |
|
|
| L | SCART2 (DEC.) |
|
|
| R | OUT |
|
| OPTICAL COAXIAL | ANT. | |
| Center | DVD | YC | |
| OUTPUT | SCART1 (TV) | ||
| DIGITAL OUT |
| ||
Front speaker | speaker |
|
|
|
Front speaker |
| To COAXIAL DVD DIGITAL OUT connector | ||
(left) | (right) |
| ||
|
|
| ||
| Dolby Digital, DTS |
| To COAXIAL DIGITAL | |
| or MPEG decoder |
| ||
|
| AUDIO INPUT connector | ||
|
|
|
|
| Subwoofer | Center | Center |
Surround | Surround | speaker for | speaker for | |
speaker | speaker |
| MPEG (left) | MPEG(right) |
(left) | (right) |
|
|
|
NOTE
•Be sure to turn off the power to all components in the system before connecting another component.
•Refer to the Owner’s Manuals for the components to be connected to this unit.
•If you play a disc that supports Dolby Digital audio and the HDR1000 is connected to a Dolby Digital decoder then set Dolby Digital to On for audio output in the DVD setup mode.
•If you play a disc that supports DTS audio and the HDR1000 is connected to a DTS decoder then set DTS to On for audio output in the DVD setup mode.
•If you play a disc that supports MPEG audio and the HDR1000 is connected to a MPEG decoder then set MPEG to On for audio output in the DVD setup mode.
•Unless connected to a Dolby Digital decoder a DTS decoder or a MPEG decoder, set Dolby Digital, DTS, and MPEG to Off for audio output in the DVD setup mode. Playing a DVD using incorrect settings may gen- erate noise distortion, and may also damage the speakers.
•OPTICAL and COAXIAL connectors are only useful in DVD mode and have no function in HDD mode.
– 14 – | EN / 2A01 |