Philips HDR1000 HDD Recording, Manual Recording, SET the Title Name, Select the Recording Mode

Page 23
Position Number

HDD RECORDING

MANUAL RECORDING

This HDR1000 stores the recorded programs as video titles on the HDD.

Before you begin, press HDD button so that the blue HDD light appears on the front panel on the HDR1000.

To set the recording mode, refer to page 19.

RECORDING ONE PROGRAM WHILE

VIEWING ANOTHER VIA THE TV

You can record one program whilst viewing another via the TV. To start recording, follow steps [1] to [3] under “MANUAL RECORDING”. Then, set the TV to the program you want to watch.

Select the program to be recorded.

Press the P(PROG) +/–, or Number buttons (0-9) on the remote control.

(Example: position number 01)

Program Name

P01/ARD

Stereo

TO MONITOR THE PROGRESS OF YOUR RECORDING;

Select the input on your TV reserved for HDR1000.

SET THE TITLE NAME

Display “Navigation”screen.

Select the Recording mode.

Press the MODE button. (Refer to “SELECT THE RECORDING MODE”.)

Press REC/OTR button.

The “®” indicator on the display lights up.

Press STOP button when recording is completed.

“Do you want to stop the recording?” will appear. If it is OK, press STOP button again.

Helpful Hints

Press NAVI button.

Select the title whose name you want to set.

Press K or L button.

The cursor onto Watch

 

Navigation

 

Name

Length

Date Program Watch Resume Delete

button will move.

COAST 1:32:35

10/Jan PRO7

BOAT

2:30:43

09/Jan DSF

 

• Press 1 or 0 button

WIEN

2:00:00

09/Jan NTV

 

OSAKA 1:00:22

30/Dec RTL

 

to review next page (or

MUSIC 0:30:11

24/Dec LINE1

Total Titles 12

1/3 page

Small Screen

previous page).

Time Shift

 

 

(Current Picture)

 

 

 

Select the title Name.

Press TITLE button.

If a program has a copyright protection, it may

 

not be recorded to the HDD.

When you try to record more than the available

 

free space capacity or when recording is already

 

being performed, recording will not be performed.

When you try to record more than 50 titles, a

 

warning message will appear. In this case, press

 

NAVI button, then delete unwanted Titles in

 

Navigation menu. Or press RETURN button to

 

remove message.

• You can freeze the picture by pressing PAUSE but-

Set the title

Name.

Press K or L button to select your desired char- acter.

Press{ or B button to move the cursor.

Then, press OK button.

Navigation

Name

Length

Date Program Watch Resume Delete

COAST 1:32:35 10/Jan PRO7

BOAT

2:30:43 09/Jan DSF

 

WIEN

Enter Name:

 

2:00:00

09/Jan NTV

 

OSAKA 1:00:22 30/Dec RTL

 

 

W I

E N _ _ _ _

MUSIC 0:30:11 24/Dec LINE1

Total Titles 12

1/3 page

Small Screen

Time Shift

 

A-Z.0-9 Input:KL Move:{BStore:OK Exit:RETURN

 

 

 

(Current Picture)

[

ABC....XYZ0123.....789 [

 

ton during recording. But recording is continued.

Maximum recording time of a title is 5 hours.

It is not possible to change the Recording mode

 

during record or playback.

Exit the setting mode.

Press NAVI button or press RETURN button to exit.

OTR (One Touch Recording)

You can set a recording length simply by pressing REC/OTR button.

Maximum recording time is 5 hours.

Select the program to be recorded.

Press P(PROG) +/–, or Number buttons (0-9) on the remote control.

SELECT THE RECORDING MODE

You can chose between HQ,SQ or LP modes for recording. Details are page 26.

Select the Recording mode.

Press MODE button until the required Recording mode is displayed.

Press REC/OTR button repeatedly.

Each time you press REC/OTR button, the end schedule time of OTR will appears on the TV screen and it will be extended by 30 minutes.

– 24 –

EN / 2A01

Image 23
Contents Table of Contents Information Laser SafetyImportant Safeguards About Copyright PrecautionsPower Supply DEW WarningBUILT-IN Hard Disc Symbols Used in this ManualFeatures Disc Types About the DiscsPlayable Discs Cabinet Servicing Handling PrecautionsServicing Disc Handling Front Panel Rear View Remote ControlOperating Controls and Functions DVD Digital Display Loading the BatteriesConnections Hint for Optical cable not supplied To 21-Pin Scart connector To Y/C Output Initial Setting Initial SettingsClock Setting Change the Settings2001-2099 Exit the setting modeSelect the year Select Language. Clock Language SettingTime Shift Select time for Skip Time SettingSelect Skip Time Select time for Skip Forward Tuner Setup Set Frequency Set Fine TuningSelect a preset number To delete the preset programSet TV tuner to the frequency which you select at step Modulator SetupSelect frequency for Frequency out Select ModulatorRecording ONE Program While Viewing Another VIA the TV Select the Recording ModeHDD Recording Manual RecordingDelete Title Stored on HDD HDD NavigationPlayback Video Titles Resuming PlaybackAutomatic Timer Recording Timer RecordingSet Program Set Rec. ModeSet Date Day/MonthSet the Name To save the dataThen, press OK button Timer Review Select ShowView sys- tem Timer Recording Using the Showview SystemConfirm the timer program Showview SystemExample Without VPS/PDCWith VPS/PDC Information Display When RecordingWhen Recording TV program When Time Shift & RecordingRecording from DVD Disc to HDD Title Menu DVD OperationDisc Menus Fast FORWARD/REVERSE Search PauseStep by Step Playback ResumeTime Search ZoomStarting from a Desired Track TITLE/CHAPTERRepeat Repeat PlaybackRepeat Track Random PlaybackProgram MP3 Playback Track SelectionDisplay Information Changing the ON-SCREEN Display Stereo Sound ModeAudio Language Subtitle LanguageParental Lock Press Setup button during playback is stoppedEnter your four-digit password Press Setup button to exitDisplay screen and Markers will appear on the TV screen Marker Setup ScreenPress Search Mode button three times during playback To compress the range of sound volume Change the DVD Player SettingsAudio Settings for DVD Trusurround SettingPress OK button repeatedly to turn Angle icon on or Display SettingsDefault setting is on Language options Initial Setting On-screen display Language SettingsTroubleshooting Guide Scart Cable Euro Audio/Video Cable SpecificationsSupplied Accessories Remote Control with two R6 AA Batteries