Sony MHC-RX100AV Recording on a tape manually, Start playing the source to be recorded

The Tape Deck

Recording on a tape manually

You can record from CD, tape, or radio as you like. For example, you can record just the songs you want or record from the middle of the tape. The recording level is adjusted automatically.

POWER	4		6 2
0	)		¹
		¤	á¸

¼	â	¼	â
» á	¹	¹	» á

¤ ¤

DOLBY NR 3 5 ¹ 1

1 Insert a blank tape into deck B.

2 Press FUNCTION repeatedly until the source you want to record (e.g., CD) appears.

3 Press r.

Deck B stands by for recording. á(for front side) lights up.

4 Press DIRECTION repeatedly to select Ato record on one side. Select a (or RELAY) to record on both sides.

5 Press ¸ on deck B.

Recording starts.

6 Start playing the source to be recorded.

To	Press
Stop recording	¹on the deck B
Pause recording	¸on the deck B

Tips

•If you want to record from the reverse side, press »so that »(for reverse side) lights up.

•When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR so that “DOLBY NR B” appears after pressing r.

26