Waking up to music
— Wake-up Timer
You can wake up to music at a preset time every day. Make sure you have set the clock (see “Step 3: Setting the time”).
9 3 4,5,6,7,8
0 ) | ¹ |
¤ á¸
TIMER SELECT | 2 |
|
1 Prepare the music source you want to play.
•CD: Insert a CD. To start from a specific track, make a programme (see “Programming the CD tracks”).
•Tape: Insert a tape with the side you want to play facing forward.
•Radio: Tune in the preset station you
want (see “Step 4: Presetting radio stations”).
2 Adjust the volume.
3 Press CLOCK/TIMER SET.
“SET (DAILY 1)” appears.
4 Turn jog dial to select DAILY 1 or 2, then press ENTER/NEXT.
“ON” appears and the hour digits flash in the display.
1
VOLUME
5 Set the time to start playback.
Turn jog dial to set the hour, then press
ENTER/NEXT.
The minute indication starts flashing.
1
VOLUME
Turn jog dial to set the minute, then press ENTER/NEXT.
The hour indication flashes again.
6 Set the time to stop playback following the above procedure.
7 Turn jog dial until the music source you want appears.
The indications change as follows: TUNER nCD PLAY nTAPE PLAY
8 Press ENTER/NEXT.
The start time, followed by the stop time and the music source, appears, then the original display appears.
9 Turn off the power.
continued
41