Step 2: Setting up your speakers (continued)
1 Press PRO LOGIC
“PRO LOGIC ON” appears.
2 Press T.TONE ON/OFF on the remote.
The test tone is heard from the speakers in the following order. Adjust the volume of the test tone.
Front (left) nCenter nFront (right)
n | Rear |
|
3 From your listening position, press CENTER LEVEL
The volume levels from each speaker must become the same.
4 Press T.TONE ON/OFF when you are done adjusting.
The test tone is turned off.
Note
The test tone feature works only for Dolby Pro Logic Surround sound.
Tip
If you turn VOLUME (or press VOLUME +/– on the remote) all the speaker volumes change.
Step 3: Setting the time
You must set the time before using the timer functions.
1 2,4 3,5
0 ) | ¹ |
¤ á¸
1 Press CLOCK/TIMER SET.
The hour indication flashes.
2 Turn the jog dial to set the hour.
The clock is on a
3 Press ENTER/NEXT.
The minute indication flashes.
4 Turn the jog dial to set the minute.
5 Press ENTER/NEXT.
The clock starts working.
Tips
•If you’ve made a mistake, start over from step 1.
•Setting the time deactivates the demo mode . If you want to display the demo mode, press DISPLAY/DEMO when the power is off.
8