Recording a CD by specifying track order (continued)
8 Press ¸on the remote to insert a pause at the end of side A.
“P” appears in the display and the total playing time resets to “0.00” in the display.
9 Repeat steps 5 and 6 for tracks from the same disc or steps 4 to 6 for tracks from another disc to programme the remaining tracks to be recorded on side B.
10 Press CD SYNCHRO.
Deck B stands by for recording and the CD player stands by for playback. á (for front side) lights up.
11 Press DIRECTION repeatedly to select Ato record on one side. Select a (or RELAY) to record on both sides.
12 Press ¸on deck B.
Recording starts.
To stop recording
Press ¹on the deck B or on the CD player.
To check the order
Press CHECK on the remote repeatedly. After the last track, “CHECK END” appears.
To cancel Programme Edit
Press PLAY MODE repeatedly until “PROGRAM” or “SHUFFLE” disappears from the display.
Selecting tape length automatically
— Tape Select Edit
You can check the most suitable tape length for recording a CD. Note that you cannot use Tape Select Edit for discs containing more than 20 tracks.
/After inserting a CD, press EDIT once, so that “EDIT” flashes.
The required tape length for the currently selected CD appears, followed by the total playing time and tracks for side A and side B.
Note
You cannot use this function after programming.
In order to use this function, you must first erase the programme (see “To clear the entire programme” on page 25).
28