Recording from the radio
You can record the radio programme on a tape by calling up a preset station. You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is automatically adjusted.
POWER | 6 3 | 2 | 1 |
0 | ) | ¹ |
|
|
| ¤ | Ḡ|
¼ | â | ¼ | â |
» á | ¹ | ¹ | » á |
¤ | ¤ |
DOLBY NR | 5 7 ¹ | 4 |
|
1 Press TUNER/BAND to select the band you want.
2 Press TUNING MODE so that “PRESET” appears in the display.
3 Turn the jog dial to tune in a preset station.
Turn counter- |
|
| Turn clockwise |
clockwise for |
|
| for higher |
lower preset | – | + | preset numbers. |
|
| ||
numbers. |
|
|
|
Preset number |
| Frequency | |
|
|
| TUNED |
|
|
| STEREO |
|
|
| VOLUME |
PRESET |
|
| MHz |
4 Press ¤ EJECT and insert a blank tape into deck B.
With the side | â | ¼ |
you want to |
| á » |
record facing |
|
|
forward |
|
|
|
| ¤ |
5 Press r.
Deck B stands by for recording.
6 Press DIRECTION repeatedly to select A to record on one side. Select a (or RELAY) to record on both sides.
7 Press ¸ on deck B.
Recording starts.
To stop recording
Press ¹ on deck B.
Tips
•If you want to record from the reverse side, press »so that »(for reverse side) lights up.
•When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.
•To record
• When you want to reduce the hiss noise in low- level
• If noise is heard while recording from the radio, move the respective aerial to reduce the noise.
18