3 Turn jog dial to select REC, then press ENTER/NEXT.
“ON” appears and the hour digits flash in the display.
REC
VOLUME
4 Set the time to start recording.
Turn jog dial to set the hour, then press
ENTER/NEXT.
The minute indication starts flashing.
REC
VOLUME
Turn jog dial to set the minute, then press ENTER/NEXT.
The hour indication flashes again.
5 Set the time to stop recording following the above procedure.
The start time appears, followed by the stop time, the recording source and the radio station, then the original display appears.
6 Insert a recordable tape.
7 Turn off the power.
When the recording starts, the volume level is set to the minimum.
To check the setting
Press TIMER SELECT and turn the jog dial to select “REC”, then press ENTER/NEXT. To change the setting, start over from step 1.
To cancel the timer operation
Press TIMER SELECT and turn the jog dial to select “OFF”, then press ENTER/NEXT.
Notes
•When setting the
•If the power is on at the preset time, the recording will not be made.
43