Preparation
General notes
English
5 | 1 | 4 | 3 | 2 |
|
| II | Y |
DIGITAL AUDIO OUT | STEREO OUT |
| |
PCM - MPEG2 - DOLBY DIGITAL - DTS |
|
| CB |
|
| LEFT | |
|
|
|
RIGHT | I | CR |
|
|
OUT | OUT | OUT | ANALOG | (CVBS) | (Y/C) | |
OPTICAL | OPTICAL | COAX |
| VIDEO OUT | VIDEO OUT |
-Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. These are shown in the drawing below.
Please refer to your TV, VCR, Stereo System and any other User Manual(s) as necessary to make the optimal connections.
-Do not connect your
-For better sound reproduction you can connect the player audio outputs to your amplifier, receiver, stereo system or A/V equipment. For this see ‘Connecting to optional equipment’ on the next page.
Caution: Do not connect the player’s audio output to the phono input of your audio system.
Connect to a TV
Euroconnector
●Connect the Euroconnector to the corresponding connector on the TV using the Euroconnector cable (1) supplied. (Europe only)
YUV connections
1Connect the YUV connections to the corresponding connector on the TV using the YUV cables (2) supplied. (non Europe)
2Connect the audio Left and Right output sockets to the corresponding sockets on the TV using the audio cable (5) supplied.
If your TV is not equipped with a Euroconnector or YUV connections you can select one of the following alternative connections:
S-Video (Y/C) connection
1Connect the
2Connect the audio Left and Right output sockets to the corresponding sockets on the TV using the audio cable (5) supplied.
Video CVBS connection
1Connect the Video socket to the corresponding socket on the TV using the video cable (4) supplied.
2Connect the audio Left and Right output sockets to the corresponding sockets on the TV using the audio cable (5) supplied.
PREPARATION 17