English | Accesscontrol | off | no | off |
| ||||
| Statuswindow |
| Entercode |
|
| PBC |
|
| |
| DigitalNaturalMotion |
|
|
|
Accesscontrol | off |
| no | off2 |
Childlock |
|
|
| |
Statuswindow | Parentallevel |
|
| |
PBC |
| untry |
| |
DigitalNaturalMotion | Changecode |
|
| |
Access control; Parental control (DVD- Video only)
Movies on DVD discs may contain scenes not suitable for children. Therefore discs may contain ‘Parental Control’ information which applies to the complete disc or to certain scenes on the disc. These scenes are rated from 1 to 8 and alternative, more suitable scenes are available on the disc. Ratings are country dependent.
The ‘Parental Control’ feature allows you to prevent discs from being played by your children or to have certain discs played with alternative scenes.
Activating/deactivating Parental Control
1In Stop mode, select ACCESS CONTROL in the FEATURES
menu using the w/v keys then press u.
2Enter your
3Move to Parental level using the w/v keys.
4Move to Value Adjustment bar using the u key.
5Then use the w/v keys or the numerical keys on the remote control to select a rating from 1 to 8 for the disc inserted.
Rating 0 (displayed as ‘-
Parental Control is not activated. The Disc will be played in full.
Ratings 1 to 8 (1: child safe - 8 adults only):
The disc contains scenes not suitable for children. If you set a rating for the player, all scenes with the same rating or lower will be played. Higher rated scenes will not be played unless an alternative is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, play will stop and the
6Press OK or t to confirm and press t again to exit the menu.
Country
1In Stop mode, select ACCESS CONTROL in the FEATURES
menu using the w/v keys and press u.
2Enter the old code.
3Move to CHANGE COUNTRY using the w key.
4 Press the u key.
5 Select a country using w/v.
6 Press OK or t to confirm and press t again to exit the menu.
Changing the 4-digit code
1In Stop mode, select ACCESS CONTROL in the FEATURES
menu using the w/v keys and press u.
2Enter the old code.
3Move to CHANGE CODE using the w key.
4 Press the u key.
5 Enter the new
6 Enter the code a second time and reconfirm with OK. 7 Press t to exit the menu.
Note: If you have forgotten your code, press 9 four times while in the access control PIN code box and exit with OK. Access control is now switched off. You can then enter a new code (twice!) as described above.
30PRERATION