Philips DVD1010 manual Switching on, Virgin Mode, General, Manual operation, Automatic setting

Switching on

1 Switch on the TV and select the video input for your DVD-Video

VIDEOplayer.

ON/OFF 2 Press POWER ON/OFF.

➤ The player display lights up and the ‘Virgin Mode Screen’ appears.

The ‘Virgin Mode’ will only occur after the very first start up of the player. In ‘Virgin Mode’ you may have to set your personal preferences for some of the player’s most relevant items. See ‘Virgin Mode’ in the following.

Virgin Mode

English

PREVIOUS RESUMENEXT

ZOOMDNM

ANGLE

VOL CH

General

In ‘Virgin Mode’ you may have to set your preferences for some of the player’s features.

Manual operation

After switching on the player for the very first time, the ‘Virgin Mode Screen’ will appear (see ‘Switching On’).

The menu for the first item to be set is displayed and the first option is highlighted.

●Use the w v keys to go through the options in the menu. The icon of the selected option will be highlighted.

●Press OK to confirm your selection and to select the next menu.

Automatic setting

When settings can be taken over from your TV or Home Cinema system, the message ‘Auto configuring in process’ will appear.

Menus for which no settings are available will be displayed. They have to be set manually.

Note: Preferences have to be set in the order in which the item menus will appear on the screen.

The ‘Virgin Mode’ will only be cancelled after the settings for the last item have been confirmed.

If any other keys than w v or OK are pressed, will appear on the screen.

If the player is switched off while setting personal preferences, all preferences will have to be set again after switching the player on again.

PREPARATION 23