English
DNM | STOP | PLAY | PAUSE |
PEN/CLOSE
ZOOMDNM
ANGLE
VOL | CH |
Using a second DVD player next to the DVD1010
To operate the DVD1010 via the remote control without responce of a second player to the remote control commands, you can switch the remote and player to use a second set of remote control codes.
The default system code is Code 1.
Programming the DVD1010 to respond to different RC code.
●To program the DVD1010 to respond to Code1/Code 2, turn the power OFF.
●Simultaneously press the STOP 9 and PAUSE ; buttons on the front panel of the player while turning the power ON.
●After RCCODE1 or RCCODE2 appears on the display panel of the player, release STOP 9 and PAUSE ; .
●You can change the current code by pressing the PAUSE ; key within 5 seconds.
Selecting remote control code on remote control
●To select Code 1 or Code 2 on the remote control, simultaneously press the DNM button on the remote control and 1 or 2 on the numerical keypad.
➤The remote control will now be set to the remote contol code of your choice.
➤This action can be repeated whenever necessary.
| BRAND | CODE | |
| Bang & Olufsen | 592, 114 |
|
| Grundig | 097, 562, 581, 218, 232, 264, 561, |
|
|
| 064, 222, 514, 614 |
|
| Hitachi | 172, 190, 252, 070, 178, 376, 383, |
|
|
| 136, 071, 065, 244, 436, 063, 223, |
|
|
| 225, 584, 083, 132, 333, 603, 043, |
|
|
| 059, 254, 575, 605 |
|
| JVC | 080, 096, 063, 187, 217, 219, 398, 633 |
|
| Panasonic | 078, 277, 082, 241, 188, 264, 253, |
|
|
| 190, 240, 394, 584 |
|
| Philips | 039, 583, 081, 350, 220, 064, 070, |
|
|
| 114, 401, 581 |
|
| Radiola | 064, 350, 039 |
|
| SBR | 039, 064, 070, 220 |
|
| Saba | 232, 136, 528, 370, 114, 190, 240, |
|
|
| 223, 314, 225, 362, 102, 326, 584 |
|
| Samsung | 087, 046, 205, 244, 291, 317, 397, |
|
|
| 036, 057, 059, 064, 066, 083, 117, |
|
|
| 454, 515, 583, 614 |
|
| Schneider | 064, 363, 350, 571, 330, 421, 084, |
|
|
| 245, 274, 379, 398, 695 |
|
| Sony | 027, 037, 532, 063, 138, 107, 038, 678 |
|
| Telefunken | 333, 370, 136, 279, 528, 525, 289, |
|
|
| 498, 652, 032, 083, 101, 111, 128, |
|
|
| 240, 362 |
|
| Thomson | 528, 370, 136, 225, 232, 360, 223, |
|
|
| 314, 326, 264, 426, 376, 587 |
|
| Toshiba | 062, 183, 580, 529, 270, 536, 535, |
|
|
| 097, 087, 063, 181 |
|
|
|
|
|
Programming the remote control
Your remote control can be used to control your television.
To control this equipment, the following buttons on the remote control are available:
VOL+, VOL-, CH+/- and c
1To change the remote control for use with your brand of television, select your brand from the next table. Note the first
2Please press the DNM and RETURN button simultaneously for at least 3 seconds.
➤Your remote cotrol is now disabled for all functions.
3Enter the digits of the selected 3 digit code number within 30 seconds.
●In case you press a wrong key or an incorrect number, repeat steps 1,2 and 3.
4The remote control is now programmed to control your Television. If it does not react properly on the mentioned buttons, select the next 3 digit code number behind your brand of Television and repeat step 2 and 3.
20PREPARATION