Sound

English

TVShape	off	no	off
Blacklevelshift
Videoshift
Coloursettings
Personalcolour	Offn
ActiveControl	Offn

			q
	off	no	off
Digital output	Off
Analog output	PMC only
Night mode	All
Karaoke vocal

Important:

The ‘Colour settings’ and ‘Personal colour’ settings are only active when the video mode ‘Active control’ is switched ON or/and the ‘Digital Natural Motion’ (DNM) feature is switched ON. See below table 1.

Video Mode	Digital Natural Motion	Colour settings/
(Active Control)		Personal colour

ON	OFF	Available

OFF	ON	Available

ON	ON	Available

OFF	OFF	Not available

Active Control (not for CVBS and S-video)

With Active Control switched on, the player continuously monitors and corrects the signal coming from the DVD-Video to ensure you always have the best possible picture, and that all discs you play have the same appearance.

●To select the default Active Control setting on your player, select p from the Personal Preferences menu then select Active Control.

●Using the v w buttons on the remote control, select Active Control ON or OFF.

●Press OK to confirm and return to the main menu.

➤ The Active Control default setting you have chosen will now apply whenever you switch the player on.

Digital output

Factory setting ALL means that both coaxial and optical outputs are switched on. If you are not connecting equipment with a digital input, change the setting to OFF.

If your equipment doesn’t include a digital multi-channel decoder, set the digital output to PCM (Pulse Code Modulation). Both coaxial and optical outputs are then switched on for PCM only.

Analog output

Select Stereo or Dolby Surround or 3D sound.

3D sound

In a setup without rear speakers (analog stereo output), 3D Sound remixes the available channels of digital surround (Dolby Digital and MPEG-2) into a two speaker output, while retaining all of the original audio information. The result is the listening sensation of being surrounded by multiple speakers.

Dolby Surround

When using audio equipment with a Dolby Surround decoder select this option. In this option, the 5.1 channels of audio (Dolby Digital and MPEG-2) are downmixed to a Dolby Surround compatible 2 - channel output.

26PREPARATION