Philips SRU6080 owner manual Direct Code Entry, Searching for Codes by Brand

Page 6

Code Entry

Code Setup Options: Pressing OK at the CODE SETUP screen presents 3 options for programming a Mode with codes. These are ENTER CODES, (lets you enter a 4 digit code directly from the printed code list) SEARCH CODES, (lets you search through the codes stored in the remote to find the correct one for your device), and BRAND CODES, (lets you search through the codes (just for your brand of device) stored in the remote to find the correct one for your device).

Direct Code Entry

1.Manually turn on the device to be controlled.

2.Press and hold the SETUP button until CODE SETUP is displayed (takes about 3 seconds), then release the SETUP button.

3.Press and release OK. ENTER CODES is displayed.

4.Press and release OK. MODE KEY? is displayed.

5.Press and release the desired mode button (TV, VCR, etc.). The Mode is displayed along with its currently programmed code.

6.Enter the 4 digit code from the code tables (on separate sheet). After the 4th digit is entered SUCCESS is displayed and the remote returns to normal operation.

If an invalid code is entered, CODE ERROR is shown in the display and the remote returns to normal operation.

7.With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your equipment, try one of the other codes for your brand of device.

Searching for Codes

If your product does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following these steps.

1.Manually turn on the device (TV, VCR, etc.) to be controlled.

2.Press and hold the SETUP button until CODE SETUP is displayed (takes about 3 seconds), then release the SETUP button.

3.Press and release OK. ENTER CODES is displayed.

4.Press the down navigation button until SEARCH CODES is displayed.

5.Press and release OK. MODE KEY is displayed.

6.Press and release the desired mode button (TV, VCR, etc.). DEVICE? TV is displayed.

7.Using the Up/Down keys, select the Device type to be programmed (TV, VCR, DVD, etc. Note - For TV Mode, only a TV Device can be selected.

10

Code Entry, cont.

8.Press and release OK to confirm selection. SEARCH KEY? is displayed.

9.Press the Channel Up button (or POWER, or PLAY for VCRs/DVDs) repeatedly (up to 300 times) until the Device to be controlled changes channel, turns off or responds accordingly. SEARCHING is displayed (along with the Device selection) during the search process. If the required Code is accidentally passed then press the Channel Down button to backtrack through the Library. Press Channel Up (or Power or Play) to change direction forward again.

10.Press and release OK to install the Code. SUCCESS is displayed and the remote returns to normal operation.

Notes:

1.If the Device does not have a CHANNEL UP button, use PLAY (VCR/DVD) or the POWER button instead.

2.Code Search starts from the currently stored 4-digit number under that Mode.

3.When all codes have been searched SEARCH END is displayed and remote returns to normal operation.

Searching for Codes by Brand

Lets you search for a code for a specific Brand within the Code Library for a particular manufacturer.

1.Turn on the device (TV, VCR, etc.) to be controlled.

2.Press and hold the SETUP button until CODE SETUP is displayed (takes about 3 seconds), then release the SETUP button.

3.Press and release OK. ENTER CODES is displayed.

4.Press the down navigation button until BRAND CODES is displayed.

5.Press and release OK. MODE KEY? is displayed.

6.Press and release the desired mode button (TV, VCR, etc.). DEVICE? TV is displayed.

7.Using the Up/Down keys, select the Device type to be programmed (TV, VCR, DVD, etc. Note - For TV Mode, only a TV Device can be selected.

8.Press and release OK to confirm selection. BRAND KEY? is displayed.

9.Press and release the numeric key (1-8) corresponding to desired Manufacturer. (See table on separate sheet for code list). SEARCH KEY is displayed.

10.Press the Channel Up button (or POWER, or PLAY for VCRs/DVDs) repeatedly until the Device to be controlled changes channel, turns off or responds accordingly. “Searching” is displayed (along with the Device selection) during the search process.

11

Page 5 Page 7
Image 6
Page 5 Page 7
Contents SRU6080 Table of Contents IntroductionLiquid Crystal Display LCD Helps with setup Button Functions Button Functions,RECORD,PLAY,STOP,REW,FF,PAUSE VCR control Replay code is DVD Functions labeled in BlueTivo/Replay Functions labeled in Yellow TiVo code is SAT FunctionsSetup Setup,Direct Code Entry Code EntryCode Entry, Searching for CodesCode Identification Feature System Setup OptionsCode Identification Setting the Time of Day Time Setup Setting the Date Date SetupTimer Setup Setting the Backlighting On time Backlight SetupReset the LCD Remote to Factory Defaults System Reset Setting and Clearing a TV Sleep Timer TV Sleep SetupSetting and Clearing Timers Timer Setup To clear a Timer Timer Bell in normal displayCode Learning Tips On Learning,Learning Notes Learning Commands Clearing CommandsTo Clear all Learned Commands under a mode Macros, To Setup a MacroMacros Macro NotesLimited Lifetime Warranty TroubleshootingRemote does not operate some features of your product Remote does not operate your productContenido IntroducciónFunciones de los botones Funciones de los botonescontinuaciónFunciones de TiVo/Replay en amarillo TiVo el código es Replay el código esPulgar HACIAARRIBA/ABAJO ajusta las Configuración Configuración continuaciónBúsqueda de códigos Introducción de códigosIntroducción directa de códigos Búsqueda de códigos por marcaOpciones de configuración del sistema Identificación de códigosConfiguración de la hora Time Setup Configuración de la fecha Date SetupConfiguración de temporizadores Restablecimiento del mando LCD a los ajustes de fábricaConfiguración y eliminación de temporizadores Timer Setup Aprendizaje de códigos Consejos para el aprendizajeNotas sobre el aprendizaje Aprendizaje de comandos Eliminación de comandosNotas sobre las macros Para configurar una macroMacros continuación Para eliminar una macroEl mando no acciona algunas funciones del producto Resolución de problemasEl mando no acciona el producto Garantía de duración limitadaTable des matières TV/VCR/DVRFonctions des boutons Fonctions des boutons suiteFonctions SAT Fonctions Tivo/Replay surlignées en jauneFonctions DVD en bleu TiVo codePréparation Préparation suiteSaisie de code directe Saisie de codeSaisie de code suite Recherche de codeIdentification de code Commande des appareils combinésCommande du volume / de la sourdine et fonction de perçage Programmation des codes des appareils combinésRéglage de l’heure Time Setup Réglage de la date Date SetupRéglage de la durée du rétroéclairage Backlight Setup Réglage du minuteurRéglage et annulation des minuteurs Timer Setup Apprentissage des codes Conseils sur l’apprentissageRemarques sur l’apprentissage Apprentissage des commandes Suppression des commandes Comment supprimer toutes les commandes apprises sous un modeRemarques sur les macros Comment régler une macroMacros suite Comment supprimer une macroLa télécommande ne commande pas votre produit Dépannage Garantie à vie limitéeSRU6080 Back Cover
Top Page Image Contents