Philips SRU6080 owner manual Setting the Time of Day Time Setup, Setting the Date Date Setup

Page 8

Setup, cont.

Setting any Mode to use its own Volume/Mute Control (MODEVOL.SET)

This sets any Mode to use only its own Volume/Mute control, i.e. Volume/Mute punch-through is disabled for this Mode. Note - If your chosen Mode has no Volume/ Mute functions of its own then the Volume/Mute buttons will do nothing.

1.Press and hold the SETUP button until CODE SETUP is displayed (takes about 3 seconds), then release the SETUP button.

2.Press the down navigation button until SYSTEM SETUP is displayed.

3.Press and release OK. VOL/MUTE SETUP is displayed.

4.Press and release OK. ALL VOL. SET is displayed.

5.Press the down navigation button until MODE VOL. SET is displayed

6.Press and release OK. MODE VOL. SET? is displayed.

7.Press and release OK. MODE VOL. MODE? is displayed.

8.Press and release desired Mode key (TV, VCR, DVD, etc.) to be disabled for Volume/Mute punch-through control. PLEASE WAIT is briefly displayed, followed by SUCCESS and the remote returns to normal operation.

The chosen Mode will now use its own Volume/Mute control.

Resetting Volume/Mute Control to Factory Defaults (VOL/MUTERESET)

This resets Volume/Mute control back to its Factory default settings.

1.Press and hold the SETUP button until CODE SETUP is displayed (takes about 3 seconds), then release the SETUP button.

2.Press the down navigation button until SYSTEM SETUP is displayed.

3.Press and release OK. VOL/MUTE SETUP is displayed.

4.Press and release OK. ALL VOL. SET is displayed.

5.Press the down navigation button until VOL/MUTE RESET is displayed

6.Press and release OK. CONFIRM RESET is displayed.

7.Press and release OK. PLEASE WAIT is briefly displayed, followed by SUCCESS and the remote returns to normal operation.

Volume/Mute control is now rest to its Factory default settings.

14

Setup, cont.

Setting the Time of Day (TIME SETUP)

To set the Time of day for normal LCD time display.

1.Press and hold the SETUP button until CODE SETUP is displayed (takes about 3 seconds), then release the SETUP button.

2.Press the down navigation button until SYSTEM SETUP is displayed.

3.Press and release OK. VOL/MUTE SETUP is displayed.

4.Press the down navigation button until TIME SETUP is displayed.

5.Press and release OK. TIME? is displayed showing current format (12 or 24 hour) flashing and current time.

6.Use the Up/Down navigation buttons to set the format (12Hr or 24Hr) then press and release OK.

7.The “hours” will be flashing. Use the Up/Down buttons to set the hours then press and release OK.

8.The “minutes” will be flashing. Use the Up/Down buttons to set the minutes then press and release OK.

9.SUCCESS is displayed. The remote remains in Setup Mode, returning to the CODE SETUP screen. Press QUIT then OK to exit Setup Mode.

Setting the Date (DATE SETUP)

To set the Month, Date and Day.

1.Press and hold the SETUP button until CODE SETUP is displayed (takes about 3 seconds), then release the SETUP button.

2.Press the down navigation button until SYSTEM SETUP is displayed.

3.Press and release OK.

4.Press the down navigation button until DATE SETUP is displayed.

5.Press and release OK. YEAR? is displayed with the last 2 year digits flashing.

6.Use the Up/Down buttons to set the Year then press and release OK.

7.MONTH? is displayed with the Month digits flashing. Use the Up/Down buttons to set the Month then press and release OK.

8.DATE? is displayed with the Date digits flashing. Use the Up/Down buttons to set the Date then press and release OK.

9.DAY? is displayed with the Day flashing. Use the Up/ Down buttons to set the Day then press and release OK.

10.SUCCESS is displayed and the remote remains in Setup Mode, returning to the CODE SETUP screen. Press QUIT then OK to exit Setup Mode.

15

Page 7 Page 9
Image 8
Page 7 Page 9
Contents SRU6080 Table of Contents IntroductionRECORD,PLAY,STOP,REW,FF,PAUSE VCR control Liquid Crystal Display LCD Helps with setupButton Functions Button Functions, DVD Functions labeled in Blue Tivo/Replay Functions labeled in Yellow TiVo code isReplay code is SAT FunctionsSetup Setup,Code Entry Code Entry,Direct Code Entry Searching for CodesCode Identification Code Identification FeatureSystem Setup Options Setting the Time of Day Time Setup Setting the Date Date SetupSetting the Backlighting On time Backlight Setup Reset the LCD Remote to Factory Defaults System ResetTimer Setup Setting and Clearing a TV Sleep Timer TV Sleep SetupSetting and Clearing Timers Timer Setup To clear a Timer Timer Bell in normal displayLearning Notes Code LearningTips On Learning, To Clear all Learned Commands under a mode Learning CommandsClearing Commands To Setup a Macro MacrosMacros, Macro NotesTroubleshooting Remote does not operate some features of your productLimited Lifetime Warranty Remote does not operate your productContenido IntroducciónFunciones de los botones Funciones de los botonescontinuaciónPulgar HACIAARRIBA/ABAJO ajusta las Funciones de TiVo/Replay en amarillo TiVo el código esReplay el código es Configuración Configuración continuaciónIntroducción de códigos Introducción directa de códigosBúsqueda de códigos Búsqueda de códigos por marcaOpciones de configuración del sistema Identificación de códigosConfiguración de la hora Time Setup Configuración de la fecha Date SetupConfiguración de temporizadores Restablecimiento del mando LCD a los ajustes de fábricaConfiguración y eliminación de temporizadores Timer Setup Notas sobre el aprendizaje Aprendizaje de códigosConsejos para el aprendizaje Aprendizaje de comandos Eliminación de comandosPara configurar una macro Macros continuaciónNotas sobre las macros Para eliminar una macroResolución de problemas El mando no acciona el productoEl mando no acciona algunas funciones del producto Garantía de duración limitadaTable des matières TV/VCR/DVRFonctions des boutons Fonctions des boutons suiteFonctions Tivo/Replay surlignées en jaune Fonctions DVD en bleuFonctions SAT TiVo codePréparation Préparation suiteSaisie de code Saisie de code suiteSaisie de code directe Recherche de codeCommande des appareils combinés Commande du volume / de la sourdine et fonction de perçageIdentification de code Programmation des codes des appareils combinésRéglage de l’heure Time Setup Réglage de la date Date SetupRéglage de la durée du rétroéclairage Backlight Setup Réglage du minuteurRéglage et annulation des minuteurs Timer Setup Remarques sur l’apprentissage Apprentissage des codesConseils sur l’apprentissage Apprentissage des commandes Suppression des commandes Comment supprimer toutes les commandes apprises sous un modeComment régler une macro Macros suiteRemarques sur les macros Comment supprimer une macroLa télécommande ne commande pas votre produit Dépannage Garantie à vie limitéeSRU6080 Back Cover
Top Page Image Contents