Philips SRU6080 owner manual Setting the Backlighting On time Backlight Setup, Timer Setup

Page 9

Setup, cont.

Setting the Backlighting On time (BACKLIGHT SETUP)

To set the length of time the Backlighting remains on after you stop pressing buttons. The Backlight button toggles backlighting off and on.

1.Press and hold the SETUP button until CODE SETUP is displayed (takes about 3 seconds), then release the SETUP button.

2.Press the down navigation button until SYSTEM SETUP is displayed. Press and release OK.

3.Press the down navigation button until BACKLIGHT SETUP is displayed. Press and release OK.

4.BACKLIGHT TIME? is displayed with the current Backlight On time digits flashing. Use the Up/Down buttons to set the Backlight On time in increments of 5 seconds up to a maximum of 60 seconds. The default Backlight On time is 10 seconds. To turn the Backlighting feature off, set the time to “00” (zero). Press and release OK.

5.SUCCESS is displayed and the remote remains in Setup Mode, returning to the CODE SETUP screen. Press QUIT then OK to exit Setup Mode.

Reset the LCD Remote to Factory Defaults (SYSTEM RESET)

To reset the remote back to factory default settings. All User programmed settings, e.g. code settings, learned commands, Macros, etc., are cleared to their respective default settings.

1.Press and hold the SETUP button until CODE SETUP is displayed (takes about 3 seconds), then release the SETUP button.

2.Press the down navigation button until SYSTEM SETUP is displayed. Press and release OK.

3.Press the down navigation button until SYSTEM RESET is displayed. Press and release OK.

4CONFIRM RESET is displayed. Press and release OK.

5.PLEASE WAIT is displayed while all settings are Reset then the remote exits Setup and returns to normal operation.

16

Setup, cont.

Timer Setup

Pressing OK at TIMER SETUP accesses the available Timer Options. These are a TV Sleep Timer and 4 Timers that can send a sequence of up to 3 key commands at the preset time.

Setting and Clearing a TV Sleep Timer (TV Sleep Setup)

The remote can be programmed with a TV Sleep Timer. At the end of the set Timer period, the remote sends the Power command for the TV Mode device. The TV Sleep Timer can be set for a period of 1-90 minutes. The “Zzz” symbol is displayed when a TV Sleep Timer is set.

To set a TV Sleep Timer (no “Zzz” in normal display)

1.Turn on the TV Mode device.

2.Press and hold the SETUP button until CODE SETUP is displayed (takes about 3 seconds), then release the SETUP button.

3.Press the down navigation button until TIMER SETUP is displayed. Press and release OK.

4.TV SLEEP SETUP is displayed. Press and release OK.

5.TV SLEEP SET is displayed. Press and release OK.

6.TV SLEEP TIME? is displayed with “minutes” flashing. Use the Up/Down buttons to set the minutes then press and release OK.

7.SUCCESS is displayed and the remote remains in Setup Mode, returning to the CODE SETUP screen. Press QUIT then OK to exit Setup Mode.

To clear a TV Sleep Timer (“Zzz” in normal display)

1.Press and hold the SETUP button until CODE SETUP is displayed (takes about 3 seconds), then release the SETUP button.

2.Press the down navigation button until TIMER SETUP is displayed. Press and release OK.

3.TV SLEEP SETUP is displayed. Press and release OK.

4.TV SLEEP CLEAR is displayed. Press and release OK.

5.CONFIRM CLEAR is displayed. Press and release OK.

6.SUCCESS is displayed and the remote remains in Setup Mode, returning to the CODE SETUP screen. Press QUIT then OK to exit Setup Mode.

17

Page 8 Page 10
Image 9
Page 8 Page 10
Contents SRU6080 Introduction Table of ContentsLiquid Crystal Display LCD Helps with setup Button Functions Button Functions,RECORD,PLAY,STOP,REW,FF,PAUSE VCR control Tivo/Replay Functions labeled in Yellow TiVo code is DVD Functions labeled in BlueReplay code is SAT FunctionsSetup, SetupCode Entry, Code EntryDirect Code Entry Searching for CodesCode Identification Feature System Setup OptionsCode Identification Setting the Date Date Setup Setting the Time of Day Time SetupReset the LCD Remote to Factory Defaults System Reset Setting the Backlighting On time Backlight SetupTimer Setup Setting and Clearing a TV Sleep Timer TV Sleep SetupTo clear a Timer Timer Bell in normal display Setting and Clearing Timers Timer SetupCode Learning Tips On Learning,Learning Notes Learning Commands Clearing CommandsTo Clear all Learned Commands under a mode Macros To Setup a MacroMacros, Macro NotesRemote does not operate some features of your product TroubleshootingLimited Lifetime Warranty Remote does not operate your productIntroducción ContenidoFunciones de los botonescontinuación Funciones de los botonesFunciones de TiVo/Replay en amarillo TiVo el código es Replay el código esPulgar HACIAARRIBA/ABAJO ajusta las Configuración continuación ConfiguraciónIntroducción directa de códigos Introducción de códigosBúsqueda de códigos Búsqueda de códigos por marcaIdentificación de códigos Opciones de configuración del sistemaConfiguración de la fecha Date Setup Configuración de la hora Time SetupRestablecimiento del mando LCD a los ajustes de fábrica Configuración de temporizadoresConfiguración y eliminación de temporizadores Timer Setup Aprendizaje de códigos Consejos para el aprendizajeNotas sobre el aprendizaje Eliminación de comandos Aprendizaje de comandosMacros continuación Para configurar una macroNotas sobre las macros Para eliminar una macroEl mando no acciona el producto Resolución de problemasEl mando no acciona algunas funciones del producto Garantía de duración limitadaTV/VCR/DVR Table des matièresFonctions des boutons suite Fonctions des boutonsFonctions DVD en bleu Fonctions Tivo/Replay surlignées en jauneFonctions SAT TiVo codePréparation suite PréparationSaisie de code suite Saisie de codeSaisie de code directe Recherche de codeCommande du volume / de la sourdine et fonction de perçage Commande des appareils combinésIdentification de code Programmation des codes des appareils combinésRéglage de la date Date Setup Réglage de l’heure Time SetupRéglage du minuteur Réglage de la durée du rétroéclairage Backlight SetupRéglage et annulation des minuteurs Timer Setup Apprentissage des codes Conseils sur l’apprentissageRemarques sur l’apprentissage Comment supprimer toutes les commandes apprises sous un mode Apprentissage des commandes Suppression des commandesMacros suite Comment régler une macroRemarques sur les macros Comment supprimer une macroDépannage Garantie à vie limitée La télécommande ne commande pas votre produitSRU6080 Back Cover
Top Page Image Contents