Philips SRU6080 owner manual Code Identification Feature, System Setup Options

Page 7

Code Identification Feature

If the required Code is accidentally passed then press the Channel Down button to backtrack through the Library. Press Channel Up (or Power or Play) to change direction forward again.

11.Press and release OK to install the Code. SUCCESS is displayed and the remote returns to normal operation.

Code Identification

Press and hold the respective Mode key in normal operation to display the programmed code for that Mode e.g., DVD Code 0768.

Programming Combo Device Codes

Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/VCR, etc.) will require you to set up two different Mode buttons to control both parts of the Combo device. For example, if you have a TV/DVD Combo, you might need to set up one code under the TV button to control the TV part AND a separate code (under any other Mode button) to control the DVD part.

Controlling Combo Devices

Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/VCR, etc.) have separate buttons on the original remote to select the part of the Combo device to be controlled. For example, if your Combo device is a DVD/VCR then its original remote might have separate DVD and VCR buttons for selection of the Combo part you would control. The equivalent button functions can be found on your Philips remote by using the device Mode and SETUP buttons.

Referring to “Searching for Codes” on page 10, setup a device Mode (e.g. DVD) with the correct code for your Combo device. Assuming the DVD/VCR Combo device is the example and its code is programmed under DVD Mode, press and hold the DVD Mode button for more than one second to send the DVD button command. To send the VCR button command, quickly press and release the SETUP button followed by pressing and releasing the DVD Mode button. This method can be applied similarly to all Combo devices (e.g. TV/VCR, TV/DVD, DVD/VCR, etc.) and is available for all Modes. Note this feature is not supported by all codes.

Setup, cont.

System Setup Options

Pressing OK at the SYSTEM SETUP screen accesses the System Setup Options for Volume Punch-Through control Setup, Time Setup, Date Setup, Backlight Setup and System Reset.

Volume/Mute Control and Punch-Through Feature

This remote lets you select which device Mode controls your Volume/Mute buttons. The remote is initially set (factory default) for all device Modes programmed with “Visual” codes (e.g. TV, VCR, DVD, DVR, SAT & CABLE) and “Audio” codes (e.g. CD & AUDIO) to use their own Volume/Mute control if present. If the programmed “Visual” code has no Volume/Mute operation of its own then those buttons will punch-through control to the TV Mode device without needing to change to TV Mode.

SettingALLVolume/Mute Control to any one Mode (ALL VOL. SET)

This routine can set all Modes to “punch-through” to any one chosen Mode for Volume/Mute button control without the needing to change to that Mode.

1.Press and hold the SETUP button until CODE SETUP is displayed (takes about 3 seconds), then release the SETUP button.

2.Press the down navigation button until SYSTEM SETUP is displayed.

3.Press and release OK. VOL/MUTE SETUP is displayed.

4.Press and release OK. ALL VOL. SET is displayed.

5.Press and release OK. ALL VOL. MODE? is displayed.

6.Press and release desired Mode key (TV, VCR, DVD, etc.) for Volume/Mute control. “Please Wait” is briefly displayed, followed by SUCCESS and the remote returns to normal operation.

All Modes will now punch-through to your chosen Mode for Volume/Mute control. If the chosen Mode has no Volume/ Mute commands of its own, “Volume Error” is shown in the display and the remote returns to normal operation.

12

13

Page 6 Page 8
Image 7
Page 6 Page 8
Contents SRU6080 Introduction Table of ContentsButton Functions Button Functions, Liquid Crystal Display LCD Helps with setupRECORD,PLAY,STOP,REW,FF,PAUSE VCR control SAT Functions DVD Functions labeled in BlueTivo/Replay Functions labeled in Yellow TiVo code is Replay code isSetup, SetupSearching for Codes Code EntryCode Entry, Direct Code EntrySystem Setup Options Code Identification FeatureCode Identification Setting the Date Date Setup Setting the Time of Day Time SetupSetting and Clearing a TV Sleep Timer TV Sleep Setup Setting the Backlighting On time Backlight SetupReset the LCD Remote to Factory Defaults System Reset Timer SetupTo clear a Timer Timer Bell in normal display Setting and Clearing Timers Timer SetupTips On Learning, Code LearningLearning Notes Clearing Commands Learning CommandsTo Clear all Learned Commands under a mode Macro Notes To Setup a MacroMacros Macros,Remote does not operate your product TroubleshootingRemote does not operate some features of your product Limited Lifetime WarrantyIntroducción ContenidoFunciones de los botonescontinuación Funciones de los botonesReplay el código es Funciones de TiVo/Replay en amarillo TiVo el código esPulgar HACIAARRIBA/ABAJO ajusta las Configuración continuación ConfiguraciónBúsqueda de códigos por marca Introducción de códigosIntroducción directa de códigos Búsqueda de códigosIdentificación de códigos Opciones de configuración del sistemaConfiguración de la fecha Date Setup Configuración de la hora Time SetupRestablecimiento del mando LCD a los ajustes de fábrica Configuración de temporizadoresConfiguración y eliminación de temporizadores Timer Setup Consejos para el aprendizaje Aprendizaje de códigosNotas sobre el aprendizaje Eliminación de comandos Aprendizaje de comandosPara eliminar una macro Para configurar una macroMacros continuación Notas sobre las macrosGarantía de duración limitada Resolución de problemasEl mando no acciona el producto El mando no acciona algunas funciones del productoTV/VCR/DVR Table des matièresFonctions des boutons suite Fonctions des boutonsTiVo code Fonctions Tivo/Replay surlignées en jauneFonctions DVD en bleu Fonctions SATPréparation suite PréparationRecherche de code Saisie de codeSaisie de code suite Saisie de code directeProgrammation des codes des appareils combinés Commande des appareils combinésCommande du volume / de la sourdine et fonction de perçage Identification de codeRéglage de la date Date Setup Réglage de l’heure Time SetupRéglage du minuteur Réglage de la durée du rétroéclairage Backlight SetupRéglage et annulation des minuteurs Timer Setup Conseils sur l’apprentissage Apprentissage des codesRemarques sur l’apprentissage Comment supprimer toutes les commandes apprises sous un mode Apprentissage des commandes Suppression des commandesComment supprimer une macro Comment régler une macroMacros suite Remarques sur les macrosDépannage Garantie à vie limitée La télécommande ne commande pas votre produitSRU6080 Back Cover
Top Page Image Contents