Philips BDP7100 Important notes for users in the U.K Mains plug, How to connect a plug, Italia

Page 2

Important notes for users in the U.K.

Mains plug

This apparatus is fi tted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows:

1Remove fuse cover and fuse.

2Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type.

3Refi t the fuse cover.

If the fi tted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fi tted in its place.

If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp.

Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L).

zAs these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows:

Connect the blue wire to the terminal marked N or coloured black.

Connect the brown wire to the terminal marked L or coloured red.

Do not connect either wire to the earth terminal in the plug, marked E (or e) or coloured green (or green and yellow).

Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires.

Copyright in the U.K.

Recording and playback of material may require consent. See Copyright Act 1956 and The Performer’s Protection Acts 1958 to 1972.

Italia

DICHIARAZIONE DI CONFORMITA’

Si dichiara che l’apparecchio BDP7100, Philips risponde alle prescrizioni dell’art. 2 comma 1 del D.M. 28 Agosto 1995 n. 548.

Fatto a Eindhoven

Philips Consumer Electronics

Philips, Glaslaan 2

5616 JB Eindhoven, The Netherlands

Norge

Typeskilt finnes på apparatens underside.

Observer: Nettbryteren er sekundert innkoplet. Den innebygde netdelen er derfor ikke frakoplet nettet så lenge apparatet er tilsluttet nettkontakten.

For å redusere faren for brann eller elektrisk støt, skal apparatet ikke utsettes for regn eller fuktighet.

ATTENTION!

For Customer Use:

Read carefully the information located at the bottom or rear of your Blu-ray Disc Player and enter below the Serial No. Retain this information for future reference.

Model No. BDP7100

Serial No. _______________

2

Image 2
Contents Need help fast? Copyright in the U.K How to connect a plugImportant notes for users in the U.K Mains plug ItaliaKlass 1 laseraparat Disposal of your old product Deutsch Español IndexFrançais English Table of contents Table of contents Cleaning discs Accessories suppliedSetup precautions General InformationYour Product BDP7100 Blu-ray Disc playerMain Unit Video socket Connects the video and audio signals to a Hdmi TV or HdtvTitle/Track indicator Status indicator Shows the information about playing time, clock and statusRemote Control Bookmark CancelTitle MENU/POP-UP Menu y BD Access pop-up menu Colour buttonsPreparing the remote control Option 1 Hdmi best quality ConnectConnect to the TV Option 2 Hdmi to DVI best qualityOption 4 Composite video standard quality Take the supplied composite video cableConnect to the audio system optional Option 5 S-Video standard qualityOption 3 5.1 analogue audio standard quality SocketsStandby-on light on the front of the player comes on as red Connect to the power outletOption 4 Stereo analogue audio standard quality Plug the ends of the audio cable into the audio systemOn-screen menu navigation Set UpSet the TV connection Set the audio connection Important NoteSettings menu overview Open the Settings menuConfigure the languages Open the language menuChange the preferred disc menu language Configure the audio outputEnglish Change the preferred subtitle language Change the player languageEnable dynamic range compression Change the format of the digital audio signalEnable PCM downsampling Select PCM downsampling and press OKOpen the video menu Configure the video outputEnglish Change the set up of your speakers Change the aspect ratioEnable 24fps frame per second Select Movie frame 24fps and press OKEnable screen messages English Change the resolutionConfigure the front display Select Hdmi CEC and press OK Hdmi CEC menu shows Enable Hdmi SetupAbout Hdmi CEC Consumer Electronics Control Enable the PIN Change the parental setupOpen the parental setup menu Change the rating levelLoad a disc EnjoyTurn on the Blu-ray disc player VideosJump to the next or previous chapter Control titlesJump to the next or previous title Play a title in slow motion Jump to a point of timeSearch through a chapter Change the audio languageMusic PicturesSTANDBY-ON button Set to stand-byRotate a picture English Zoom in and out on a pictureSolution TroubleshootingProblem General Increase the volume level Try another track or the discProblem General Solution Specifications BD-ROM/R*/RE DVD-Video, DVD-R/RW Video Audio CD, CD-R/RW HD DVD Any otherDVD Digital Versatile Disc DVD-VIDEODVD Video GlossaryAUDIO-CDAudio CD BD Blu-ray Disc Glossary Meet Philips at the Internet AK68-01471A Sgpjp-0735/12-1