Set Up (continued)
Change the format of the digital audio signal
A Open the { Audio Setup } menu.
B Select { Digital output } and press OK.
ÎThe available options show.
Audio setup
|
|
|
| Digital output | PCM |
| PCM downsampling | Bitstream |
| Dynamic compression |
|
| Speaker setup |
|
|
|
|
C Choose the preferred option and press OK. See ‘Audio Output’ on Specification chapter for details.
Option | Description |
|
|
PCM | The format of the digital |
| audio signal is PCM. |
|
|
Bitstream | The format of the digital |
| audio signal is bitstream. |
|
|
Enable PCM downsampling
A Open the { Audio Setup } menu.
B Select { PCM downsampling } and press OK.
ÎThe available options show.
Audio setup
| Digital output | On |
| PCM downsampling | Off |
| Dynamic compression |
|
| Speaker setup |
|
|
|
|
Option | Description |
|
|
On | If the format of the digital |
| audio signal is 96 kHz |
| PCM, the audio is |
| downsampled to 48 kHz. |
|
|
Off | Regardless of the sampling |
| frequency of the digital |
| audio signal, the audio is |
| never downsampled. |
|
|
Enable dynamic range compression
A Open the { Audio Setup } menu.
B Select { Dynamic compression } and press OK.
ÎThe available options show.
Audio setup
Digital output | On |
PCM downsampling | Off |
Dynamic compression
Speaker setup
C Choose the preferred option and press OK.
Option | Description |
|
|
On | The dynamic range |
| compression is enabled. |
|
|
Off | The dynamic range |
| compression is disabled. |
|
|
English
C Choose the preferred option and press OK.
23