To change the search speed, during a limit or direct search, press SPEED to switch between the normal and high speed search speeds. s or t flashes on the display during high speed search.
To select the hyper search speed, during a limit or direct search, press PRI/HYPER SEARCH. SEARCH flash- es on the display during hyper search speed.
Note: You can use hyper search speed only in 5
30
DETECTING DATA SIGNALS
You can set the scanner to detect data signals (nonmodulated signals such as preamble signals for pagers) during a limit or direct search.
Note: You cannot detect data signals in the air band (AM mode).
To detect data signals, press DATA so DATA appears on the display. If the scanner momentarily pauses on a transmission and detects a data signal, it resumes searching in 2 or 3 seconds.
To stop detecting data signals, press DATA so DATA disappears from the display.
