Search Skip Memory | Radio Shack PRO-2040 specs

20-414.fm Page 23 Wednesday, August 4, 1999 11:12 AM

2.Using the number keys, enter the frequency (including the dec- imal point) you want to start the search from, or the channel number containing the starting frequency, then press MAN or PGM to select the channel.

3.Press D to search up or — to search down starting from the specified frequency or channel.

-d-, SEARCH, and s or t appear, and the next available monitor memory flashes on the display.

Note: If you enter an invalid fre- quency, Error appears on the display. To correct this, repeat Steps 2 and 3.

4.When the scanner finds an active frequency you want to monitor, you can do one of the following:

•To store the frequency into the current monitor memory, press MON.

•To continue the search, press D or — .

•To hold the frequency, press LIMIT. -h-appears on the display.

•Press LIMIT again to exit the hold mode and resume the direct search.

Notes:

•If you press D or — during the hold mode, the frequency changes in the current step increment toward the upper or lower limits.

•If you tune to a search skip frequency, the display shows LOCKOUT (see “Search Skip Memory”).

Search Skip Memory

You can skip specified frequencies during a limit or direct search. This lets you avoid unwanted frequencies or ones you have already stored in a channel. You can program up to 50 skip frequencies into the scanner’s memory.

23

Image 23

Radio Shack PRO-2040 owner manual Search Skip Memory

Contents

Fm Page 1 Wednesday, August 4, 1999 1112 AM Features Fm Page 3 Wednesday, August 4, 1999 1112 AM FCC Notice Contents Scanning Legally Preparation Connecting PowerUsing Standard AC Power Memory Backup Using Vehicle Battery Power Optional Outdoor Antenna Connecting AN AntennaTelescoping Antenna Resetting the SCANNER’S Display Initializing Scanner Connecting AN EARPHONE/ HEADPHONES/ External Speaker Listening Safely Traffic Safety Look AT the Front Panel Understanding Your Scanner Turns the data skip feature on and off Programs a 2-second delay for the selected chanStores frequencies into and accesses the 10 moni Enters the up or down direction in the search mode Look AT the Display Delay before scanning or when you listen to a channel Appears when you manually select a locked channel, orDuring a search hold when the frequency is stored Appears when you program a channel for a two-second Monitor Memories Understanding the SCANNER’S MemoryChannel-Storage Banks Operation Turning on the SCANNER/SETTING the Volume and Squelch Finding Birdie Frequencies Manually Storing Frequencies in Channels Limit Search Searching for and Temporarily Storing Active Frequencies Direct Search Search Skip Memory Listening to Monitor Memories Scanning the Stored Channels Moving a Frequency from a Monitor Memory to a Channel Turning Channel-Storage Banks On and Off Manually Selecting a Channel Listening to the Weather Band Designating a Priority Channel Special FeaturesUsing the 2-SECOND Delay PRO-2040 has two scan and three search speeds Type Speed Locking OUT ChannelsChanging Scanning and Search Speeds Detecting Data Signals Guide to the Action Bands General Guide to ScanningGuide to Frequencies VHF Band 30.00-300.0 MHz Typical Band UsagePrimary Usage HF Band 3.00-30.0 MHz UHF Band Band Allocation Abbreviations Very High Frequency VHF- 30 MHz-300 MHz High Frequency HF- 3 MHz-30 MHz VHF-Hi Band 148-174 MHz Low Band 450-470 MHz Ultra High Frequency UHF- 300 MHz-3 GHz Trunked Systems Band Locally Assigned Frequency Conversion Troubleshooting Care and Maintenance Specifications Watts maximum DC 400 mA full volume unsquelchedMHz and 450 kHz Ohms Fm Page 43 Wednesday, August 4, 1999 1112 AM Radio Shack