Limit Search | Radio Shack PRO-2040 instruction

20-414.fm Page 21 Wednesday, August 4, 1999 11:12 AM

5.Press ENTER to store the fre- quency into the selected chan- nel.

Note: If you made a mistake in Step 4, Error appears on the display. Repeat Steps 4 and 5.

6.To program the next channel in sequence, repeat Steps 3-5.

To program other channels not in sequence, repeat Steps 2-5.

SEARCHING FOR AND TEMPORARILY STORING ACTIVE FREQUENCIES

You can search for frequencies using a limit or direct search, then either skip selected frequencies or tempo- rarily store frequencies into monitor memories.

Limit Search

A limit search lets you search for ac- tive transmissions within a specified range of frequencies.

Note: You can use the scanner’s de- lay feature while using limit search (see “Delay”).

Follow these steps to search for ac- tive frequencies.

1.Press PGM, then LIMIT. Lo and a frequency appear on the display.

2.Using the number keys, enter the lowest frequency (including the decimal point) you want to search within the desired fre- quency range, then press

ENTER.

Note: If you enter an invalid fre- quency, Error appears on the display. To correct this, simply repeat the step.

21

Image 21

Radio Shack PRO-2040 owner manual Searching for and Temporarily Storing Active Frequencies, Limit Search

Contents

Fm Page 1 Wednesday, August 4, 1999 1112 AM Features Fm Page 3 Wednesday, August 4, 1999 1112 AM FCC Notice Contents Scanning Legally Using Standard AC Power Connecting PowerMemory Backup Preparation Using Vehicle Battery Power Connecting AN Antenna Telescoping AntennaOptional Outdoor Antenna Resetting the SCANNER’S Display Initializing Scanner Connecting AN EARPHONE/ HEADPHONES/ External Speaker Listening Safely Traffic Safety Look AT the Front Panel Understanding Your Scanner Stores frequencies into and accesses the 10 moni Programs a 2-second delay for the selected chanEnters the up or down direction in the search mode Turns the data skip feature on and off Look AT the Display During a search hold when the frequency is stored Appears when you manually select a locked channel, orAppears when you program a channel for a two-second Delay before scanning or when you listen to a channel Understanding the SCANNER’S Memory Channel-Storage BanksMonitor Memories Operation Turning on the SCANNER/SETTING the Volume and Squelch Finding Birdie Frequencies Manually Storing Frequencies in Channels Limit Search Searching for and Temporarily Storing Active Frequencies Direct Search Search Skip Memory Listening to Monitor Memories Scanning the Stored Channels Moving a Frequency from a Monitor Memory to a Channel Turning Channel-Storage Banks On and Off Manually Selecting a Channel Listening to the Weather Band Special Features Using the 2-SECOND DelayDesignating a Priority Channel Locking OUT Channels Changing Scanning and Search SpeedsPRO-2040 has two scan and three search speeds Type Speed Detecting Data Signals General Guide to Scanning Guide to FrequenciesGuide to the Action Bands Primary Usage Typical Band UsageHF Band 3.00-30.0 MHz VHF Band 30.00-300.0 MHz UHF Band Band Allocation Abbreviations Very High Frequency VHF- 30 MHz-300 MHz High Frequency HF- 3 MHz-30 MHz VHF-Hi Band 148-174 MHz Low Band 450-470 MHz Ultra High Frequency UHF- 300 MHz-3 GHz Trunked Systems Band Locally Assigned Frequency Conversion Troubleshooting Care and Maintenance Specifications MHz and 450 kHz DC 400 mA full volume unsquelchedOhms Watts maximum Fm Page 43 Wednesday, August 4, 1999 1112 AM Radio Shack