Philips PFL40X7T/60, PFL40X7T/12 Set locks and timers, Text, Clock, Sleeptimer, Child lock

Text 2.5

With Text 2.5, you can view text with more colours and better graphics than normal text. If Text 2.5 is broadcast by a channel, it is switched on by default.

To switch Text 2.5 on or off

1.Press .

2.Select [Setup] > [TV settings] >

[Preferences].

3.Select [Text 2.5] > [On] or [Off], then press OK.

Set locks and timers

Clock

You can display a clock on the TV screen. The clock displays the time that is broadcast by your TV service operator.

Display the TV clock

1.While you watch TV, press OPTIONS.

2.Select [Status], then press OK.

The clock is displayed on the lower right hand corner of the TV screen.

Change the clock mode

You can change the clock mode to automatic or manual. By default, it is set to automatic mode, which synchronises it to Coordinated Universal Time (UTC). If your

TV cannot receive UTC transmissions, change the clock mode to [Manual].

1.While you watch TV, press .

2.Select [Setup] > [TV settings] >

[Preferences].

3.Select [Clock] > [Auto clock mode].

4.Select [Automatic], [Manual] or [Country dependent], then press OK.

Enable or disable daylight saving time You can enable or disable daylight saving time depending on your region. Before you

enable/disable daylight saving time, set the clock mode to [Country dependent].

1.In the [Clock] menu, select [Daylight saving] > [Daylight saving time] or [Standard time], then press OK. Daylight saving time is enabled or disabled.

EN 28

Set the clock manually

You can set the date and time manually.

Before you start, set the clock mode to [Manual].

1.In the [Clock] menu, select [Date] or [Time], then press OK.

2.Use the Navigation buttons to make

your selection.

3. Select [Done], then press OK.

Sleeptimer

You can switch the TV to standby after a specified time. During the countdown to the specified time, you can switch off your TV earlier or reset the sleeptimer.

1.Press .

2.Select [Setup] > [TV settings] >

[Preferences] > [Sleeptimer].

3.Press the Navigation buttons to set the sleeptimer.

The sleeptimer can be set up to 180 minutes, in steps of ten minutes. To switch off the sleeptimer, set it to zero minutes.

4.Press OK to activate the sleep timer. After the specified time, the TV switches to standby.

Child lock

To protect children from unsuitable TV programmes, you can lock the TV or block age-rated programmes.

Set or change the child lock code

1.Press .

2.Select [Setup] > [Channel settings] or

[Satellite settings] > [Child lock].

3.Select [Set code] or [Change code].

4.Enter the code with the Numeric buttons.

Tip: If you forget your code, enter '8888' to override any existing codes.

Lock or unlock channels

1.In the child lock menu, select [Channel lock].

2.Enter the child lock code with the Numeric buttons. The [Channel lock] menu appears.

3.Select channels to lock or unlock.