Philips PFL40X7T/12, PFL40X7T/60, PFL40X7H/12 Satellite settings, Install satellite channels

Page 40

4.Connect the USB storage device.

5.Press .

6.Select [Setup] > [TV settings] >

[Preferences] > [Channel list copy] > [Copy to TV], then press OK.

The channel list is copied to the TV storage device.

7. Disconnect the USB storage device.

Step 3: If the second TV has no channels installed

1.Switch on the second TV (on which you want to copy the channel list).

2.Press .

3.Select [Setup] > [Search for channels] > [Reinstall channels], then press OK.

The country menu is displayed.

4.Make sure that the country setting is the same as for the first TV.

5.Press .

6.Press [Cancel] to exit.

7.If the country setting is different, reinstall

the second TV to match the country setting of the first TV. See Set up your TV > Restore default settings (Page 41).

8.Connect the USB storage device to the second TV.

9.Press .

10.Select [Setup] > [TV settings] > [Preferences] > [Channel list copy] > [Copy to TV], then press OK.

The channel list is copied to the second TV.

11.Disconnect the USB storage device.

Satellite settings

What you can do

View satellite channels

Note: Available on certain models only. [Search for satellite] is only available if the TV supports DVB-S.

To receive satellite channels, connect the SAT connector on your TV to a satellite dish antenna.

LNBs

 

 

This TV can receive signals from 4 different

English

low noise block-down converters (LNBs).

 

An LNB is mounted at the end pole of the

 

dish antenna and captures signals from a

 

satellite.

 

Install satellite channels

1. While you watch TV, press .

2.Select [Setup] > [Search for satellite] > [Reinstall channels].

3.Follow the onscreen instructions to complete the installation.

4.Once complete, select [Finish], then press OK.

Select connection type

While you install satellite channels, you need to set the connection type. The connection type determines the number of LNBs on your dish antenna and the number of satellite channels you can install.

1.After you select [Reinstall channels], select [Settings] and then press OK.

2.Select [Connection type].

3.Select a setting, then press OK.

∙[One LNB]: Select if you have only one LNB.

∙[DiSeqC Mini (2 LNBs)]: Select if you have 2 LNBs.

∙[DiSeqC 1.0 (3-4 LNBs)]: Select for 3 or 4 LNBs.

Test signal strength

If a channel or transponder is skipped during installation, you can test the signal strength of a satellite or add a new channel.

1. While you watch TV, press .

2.Select [Setup] > [Search for satellite] > [Manual installation], then press OK.

3.Select the LNB.

4.If you know the frequency of the

transponder (which can include several channels), select [Frequency] and enter it.

5.Select [Search], then press OK.

6.If a new frequency is found, press [Store]to add the new transponder with its channels.

EN 37

Page 39 Page 41
Image 40
Page 39 Page 41
Contents PFL40x7H/12 PFL40x7K/12 PFL40x7T/12 PFL40x7H/60 PFL40x7T/60 EN Addendum IT Documento aggiuntivo SR Dodatak Contents TV tour Remote control TV controlsIntuitive menus Rear controlsEasyLink controls Smartphone controlEnsure that your TV and smartphone are Your TV Network and the InternetImportant information SafetyRisk of electric shock or fire Screen care Lock the TVCE compliance Pixel characteristicsCompliance with EMF Content. This device uses PlayReady Trademarks and copyrightsPlayReady Final Products Device’s ability to consume PlayReadySustainability Energy efficiencyEnd of use This TV is designed with energy-efficientHelp and support Switch TV on or off Adjust TV volumeSwitch the TV on Watch TVManage favourites Switch TV channelsManage channel lists Select a source Use smart settingsListen to digital radio Change picture format View programme guideFrom broadcaster View media From the InternetWhat you can do Play files from computerPlay files from USB Play options∙ Stop Stop playback ∙ Repeat Repeat a video ∙ Show info Display the file information Listen to musicBrowse Smart TV What you needAccess Smart TV Applications Apps Press Options and access anySmart TV options ReloadRemote control Rent online videosWhat you can do Download the videoAccess interactive TV Interactive TVPause TV Install USB hard drive∙ You can pause a programme for a maximum of 90 minutes Pause a live TV broadcast Start recording Switch to a digital TV channel Press to start formattingPreferences Programme guide From network Watch recordings Select a date from the pop-up window, then press OKGame setting Play gamesManage recordings Add a game consoleView Text Set locks and timers SleeptimerText ClockUse EasyLink Parental ratingPress Select Setup TV settings EasyLink TV speakers Control devices simultaneouslySelect speaker output ∙ Display the TV Home menuSynchronise audio Retain picture qualityMaximise video display Listen to another device while TV is in standbySwitch on Locks and timers SleeptimerView Scenea Load TV wallpaperSettings assistant More picture settings∙ Reset Reset to default factory settings Picture and soundChannel settings More sound settingsReset picture and sound Automatic installInstall digital channels Install analogue channelsFine-tune analogue channels Update channel list Check the country settingCopy channels ∙ Compatible software versionsInstall satellite channels Satellite settingsSatellite Language settings Add and remove satellitesMenu language Audio languageUniversal access settings Hearing impaired accessVisually impaired access Subtitles on digital channelsOther settings PlacementTV demo LocationUpdate software Restore default settingsUpdate with USB Update from digital broadcastCable quality About cablesPb Pr Blu-ray or DVD disc player Connect devicesConnect the disc player to the TV with an Hdmi cable TV receiver Video recorder Game console Connect the game console to the TV with an Hdmi cableHome theatre Digital camera Digital camcorderConnect the digital camera to the TV with a USB cable Connect the digital camcorder to the TV with an Hdmi cableConnect more devices USB hard driveComputer Connect the USB hard drive to the TV with a USB cableKeyboard and mouse Connect the keyboard and mouse to the TV with a USB cableName When complete, select Done, then press OK Watch a connected deviceAdd new device Rename deviceRemove device Network and the InternetConnect Wired connection Wi-Fi readyWatch CAM services Common interfaceTV network name Push the CAM in as far as it will goGeneral issues Channel issuesSound issues Picture issuesThere is a picture but sound quality is poor Connection issues Network issuesWireless network is distorted or not found Contact PhilipsDisplay resolutions Power and receptionDisplay and sound Multimedia Supported multimedia connectionsConnectivity Supported TV mounts Help versionFor 32 inch models 18 mm For 37 47 inch models 17 mm UMv 313913705186CAM, see Conditional Access Module 54 channel list Age ratingAudio sync ClockPage Sound settings, reset 34 standby USB mouse VGA Visually impaired 39 volumeYouTube YPbPr, component video Document order number
Top Page Image Contents