Install analogue channels

Tip: Press LIST to see the channel list.

Note: When digital TV channels are found, the list of installed channels may display empty channel numbers. You can rename, reorder or uninstall these channels.

You can search and store analogue TV channels one-by-one.

Step 1: Select your system

Note: Skip this step if your system settings are correct.

1.While you watch TV, press .

2.Select [Setup] > [Channel settings] >

[Channel installation].

3.Select [Analogue: Manual installation] > [System], then press OK.

4.Select the system for your country or region, then press OK.

Step 2: Search and store new TV channels

1.In the [Analogue: Manual installation] menu, select [Search channel], then press OK.

2.Find the channel:

∙If you know the channel frequency, enter it with the Navigation buttons or Numeric buttons.

∙If you do not know the channel frequency, search for the next

frequency that has a strong signal: Select [Search], then press OK.

3.After you have found the correct channel, select [Done], then press OK.

4.Select [Store as new channel], then press OK to store the new TV channel.

Note: If the reception is poor, reposition your antenna and repeat the procedure.

Install digital channels

If you know the channel frequency of the channels you want to install, you can search and store digital channels one-by-one. For best results, contact the broadcaster or a professional installer.

1.Press .

2.Select [Setup] > [Channel settings] >

[Channel installation].

3.Select [Digital: Reception test] > [Search], then press OK.

4.Press the Numeric buttons to enter the

channel frequency.

5.Select [Search], then press OK.

6.When the channel is found, select [Store], then press OK.

7.Press to exit.

Note: If your cable provider does not

provide you with a specific symbol rate value for DVB-C channels, select [Automatic] in

[Symbol rate mode].

Fine-tune analogue channels

If the reception of an analogue TV channel is poor, you can fine-tune the TV channel.

1.Press .

2.Select [Setup] > [Channel settings] >

[Channel installation].

3.Select [Analogue: Manual installation] > [Fine tune], and then press OK.

4.Press or to fine-tune the channel.

5.When you have selected the correct channel frequency, select [Done], and then press OK.

6.Select an option, then press OK.

∙[Store current channel]: Store the channel as the current channel number.

∙[Store as new channel]: Store the channel as a new channel number.

English

EN 35