4 Set up your TV
Picture and sound
Settings assistant
You can select picture and sound settings with the help of the settings assistant, which demonstrates the effect of your chosen setting immediately.
1.While you watch TV, press 
.
2.Select [Setup] > [Quick picture and
sound settings], then press OK.
3.Select [Start], then press OK.
4.Follow the onscreen instructions to choose your preferred settings.
More picture settings
You can change the settings in the Picture menu.
1.Press 
.
2.Select [Setup] > [TV settings] >
[Picture], then press OK.
3. Select a setting to adjust, then press OK.
Note: Options marked with a * are available for certain models only.
∙[Smart picture]: Access predefined smart picture settings.
∙[Reset]: Reset to default factory settings.
∙[Backlight contrast]: Adjust the contrast of the TV backlight.
∙[Brightness]: Adjust the intensity and details of the dark areas.
∙[Colour]: Adjust the level of colour saturation.
∙[Hue]: Compensate colour variations in NTSC transmissions.
∙[Sharpness]: Adjust sharpness in the image.
∙[Noise reduction]: Filter and reduce noise in the image.
∙[Tint]: Adjust the colour balance in the image.
∙[Custom tint]: Customise tint setting.
∙ | [Pixel Plus HD] / [Pixel Precise HD]*: |
|
| ||
| Control advanced settings to | English |
| This setting produces a brilliant, high- | |
| each pixel to match surrounding pixels. |
|
| definition image. |
|
| - [HD Natural Motion]*: Reduce |
|
motion judder and reproduce smooth motion.
-[Clear LCD]*: Enable superior motion sharpness, better black level, high contrast with a
-[Super resolution]: Enable superior sharpness, especially on lines and contours in the picture.
-[Dynamic contrast]: Set the level at which the TV automatically enhances details in the dark, middle and light areas of the picture.
-[Dynamic backlight]: Reduce power consumption by dimming the TV backlight to match room lighting conditions.
-[MPEG artefact reduction]:
Smooth the digital transitions in the picture.
-[Colour enhancement]: Set the colours to be more vivid and improve the resolution of details in bright colours.
-[Gamma]:
picture luminance and contrast.
-[Video contrast]: Change the intensity of the bright areas, keeping dark areas unchanged.
∙[PC mode]: Allow picture settings to be changed when a PC is connected to
the TV through HDMI.
If enabled, you can select [Picture format] > [Unscaled] which provides maximum detail for display of PC content.
∙[Light sensor]: Adjust settings dynamically to match lighting conditions.
∙[Picture format]: Change the picture format.
∙[Screen edges]: Change the picture size.
∙[Picture shift]: Move the position of the
picture. You cannot select this setting if the selected picture format is [Auto fill], [Auto zoom] or [Wide screen].
EN 33