1 Switch on the TV and select a TV channel.
2 Press ‘319753’ followed by (Mute) within 10 seconds.
»The setup menu is displayed.
Navigate the setup menu
To navigate the setup menu,
•Press on the remote control to select a menu.
•Press to configure or modify the settings of the selected function.
•Press M on the PBS setup remote control or MENU on the guest remote control to return to the previous menu.
Select a language
You can choose a language for the | |
display on your TV. | |
1 | Enter the setup menu. |
2 | Press to select a language. |
» The setup menu is displayed in the selected language.
Note
•You can choose [ENGLISH], [FRANCAIS], [DEUTSCH], or [ITALIANO] as your preferred language.
Select the country
Select the country where you are installing the TV.
1 Enter the setup menu.
2 Press to select the country.
Set the type of communication
You must set the correct communication | |
protocol to work with an external system. | |
1 | Enter the setup menu. |
2 | Press to select [COMMUNICATION]. |
COMMUNICATION |
|
COMMUNICATION | |
STORE | > |
ENABLE CARD SLOT | YES |
DCM TYPE | GENERIC |
CP | YES |
3 Press to select the type of communication:
•[COMMUNICATION]: Select one of the following:
•
•[SMART RC]: Accesses PayTV channels using remote control.
•[OFF]: Allows no communication.
•[STORE]: Stores the settings. Select this option after making all the selections.
•[ENABLE CARD SLOT]: Select [YES] to enable the smart card slot.
•[DCM TYPE]: Select [GENERIC] if you use
•[CP]: Select [YES] to control the panel in system mode.
12EN