automatically to standby when the SCART signal is removed.
•[NO]: Disables automatic detection of SCART signal.
Insert RGB
1 Enter the setup menu.
2 Press to select [CONFIGURATION] > [CONTROL] > [ALWAYS RGB].
3 Press to select one of the following options:
•[AV1]: Allows RGB insertion in AV1 (EXT 1) and other sources.
•[AUTO]: Allows RGB insertion in any source when [COMMUNICATION] in the setup menu is selected as
•[NO RGB]: Prevents RGB insertion in any source.
•[NO]: Allows RGB insertion in AV1 (EXT 1) only.
3 Press to set the energy saving options:
•[LOW POWER STANDBY]: Defines the power consumption for the TV when it is in standby mode:
•[GREEN]: Achieves minimum power consumption. [COMMUNICATION] is disabled in this mode.
•[FAST]: Achieves fast power up.
•[CLOCK]: Achieves low power consumption when the clock is displayed and [COMMUNICATION] is enabled.
•[ESP]: Set a time from 1 - 99 hours to enable ESP. If the TV does not receive any command for this time period, it enters the standby mode to save energy. Select [OFF] to disable ESP.
•[SMART POWER]: Selects a power saving mode. Select [HIGH] for maximum power savings. Select [MEDIUM] and [LOW] for less power savings. Select [OFF] to disable the power saving mode.
E n g l i s h
Select the energy saving option
1 | Enter the setup menu. |
| |
2 | Press | to select [CONFIGURATION] | |
| > [ENERGY SAVING]. |
| |
|
| ENERGY SAVING |
|
| LOW POWER STANDBY | CLOCK | |
| ESP |
| 2 |
| SMART POWER | LOW |
EN 21