Philips 26HFL5870D/10 Configure the control options, Automatic detection of Scart signal

Page 20

•[TUNER]: Sends the audio/ video output from the tuner to another TV that is connected to your TV.

•[MONITOR]: Sends the audio/ video output from a monitor to another TV that is connected to your TV. This is not available when input signal is protected with Vsecure, HDCP and Macrovision.

•[MUTE]: Disables the audio/ video output from all the sources.

Configure the control options

1 Enter the setup menu.

2 Press to select [CONFIGURATION] > [CONTROL].

CONTROL

 

AUDIO / VIDEO MUTE

YES

SCRAMBLED CHANNEL

YES

STEP TUNING

YES

DIGIT TIMEOUT

0.0

3-DIGIT TUNING

YES

AUTO SCART

YES

ALWAYS RGB

AUTO

RING MAX

15

CEC

>

3 Press to select one of the following options:

•[AUDIO / VIDEO MUTE]: Select [YES] to mute the source audio and video.

•[SCRAMBLED CHANNEL]: Select [YES] to install the scrambled channels during automatic installation or [NO] to skip the scrambled channels during automatic installation.

•[STEP TUNING]: Select [YES] to enable tuning of single digit channels

or select [NO] to enable the tuning of double digit channels.

•[DIGIT TIMEOUT]: Set a time between 1 - 9.9 seconds for a channel to switch to another channel. Do not select [DIGIT TIMEOUT] to be too short if you want to enable the tuning of two digit or three digit channel numbers.

•[3-DIGIT TUNING]: Select [YES] to enable the tuning of three digit channels. Select [NO] to enable the tuning of only two-digit channels.

•[AUTO SCART]: Enables or disables the automatic detection of SCART signal (see ‘Automatic detection of SCART signal’ on page 20).

•[ALWAYS RGB]: Enables or disables RGB insertion (see ‘Insert RGB’ on page 21).

•[RING MAX]: Sets the maximum number of rings.

•[CEC]: Enables or disables HDMI CEC features such as one touch play, system standby and RC passthrough.

Automatic detection of SCART signal

1 Enter the setup menu.

2 Press to select [CONFIGURATION] > [CONTROL] > [AUTO SCART].

3 Press to select one of the following options:

•[AV1]: Switches to AV1 automatically when a SCART cable is connected to the AV1 (EXT 1) connector.

•[AV2]: Switches to AV2 automatically when a SCART cable is connected to the AV2 (EXT 2) connector.

•[ALL]: Switches to the correct source when a SCART signal is detected on any connector.

•[POWER SCART]: Wakes up the TV automatically from standby when a SCART signal is detected. Switches

20EN

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Register your product and get support at Page Contents Koninklijke Philips Electronics N.V. All rights reserved To use according to scientific evidence available todayFatto in Székesfehérvár, il 02 Febbraio Hungary Safety Risk of electric shock or fireScreen care Disposal of your old product and batteriesPage TV overview Side controlsGuest menu » The guest menu is displayedAccess the guest menu with guest remote control Access the setup menu with PBS setup remote control Access the setup menu with guest remote controlSelect the country Navigate the setup menuSelect a language Press to configure one of the following Set the number of channelsSet the clock Set the number of channels for different kindsPage Configure the switch-on settings Switch on / OSDPreset the switch-on channel Preset the switch-on volumePreset the picture format Preset the switch-on power modeEnable or disable the volume indicator Set the channel displayDisplay the channel banner Select the preferred audio and subtitle languageConfigure the picture settings Configure the sound settingsConfigure the security settings Commercials are aired or when you switch channelsEnable or disable the TV controls Enable or disable the remote controlSelect the security level Security Keyboard LockConfigure the control options Automatic detection of Scart signalEnter the setup menu Press to select Configuration Control Or select no to enable the tuning of double digit channelsEnergy Saving Select the energy saving optionInsert RGB Automatically install the channels Network FrequencySelect the system Select a programSelect the type of input Customize the TV channelsSelect a ring ChannelsLabel a channel Mute a channelUSB connector of your TV Upgrade CloningClone data Press To select CloningPage To a remote control of one of those colors HealthcareVGA Back connectorsConnect devices Side connectors Use a Conditional Access Module Access CAM servicesUse a Kensington lock Insert and activate a CAMSupported display resolutions PowerProduct information MultimediaTroubleshooting TV power on/ off issuesNo access to PBS setup menu Picture issuesCommunication issues Other issuesGuest RC does not work Contact usIndex Audio/video out Auto ScartCAM ESPG l i s h
Top Page Image Contents