Philips 26HFL5870D/10 user manual Healthcare, To a remote control of one of those colors

Page 27

9 Healthcare

This section describes how to select some of the features that are used in the healthcare industry.

1 Enter the setup menu.

2 Press to select [HEALTHCARE].

HEALTHCARE

 

LOUD SPEAKER MUTE

EASYLINK

MULTI RC

ON

REMOTE COLOUR

YELLOW

3 Press to select one of the following options:

[LOUD SPEAKER MUTE]: Select [YES] to mute the TV speakers or select [NO] to enable the TV speakers. Select [EASYLINK] to enable the speakers of the easylink compliant device connected to the TV.

[MULTI RC]: Enables or disables Multi RC. Select [ON] to enable Multi RC or select [OFF] to disable multi RC. Multi RC enables you to watch upto four TVs in a room without any interference from each other’s remote controls. When Multi RC is enabled, each TV responds to a remote control that is set

to the same color that the TV is programmed to. Each of the remote controls must be programmed to one of the four colors - blue, yellow, green or red. Each TV must be separately programmed to respond

to a remote control of one of those colors.

[REMOTE COLOUR]: Configures the TV to respond to the remote control of a particular color.

E n g l i s h

EN 27

Image 27
Contents Register your product and get support at Page Contents To use according to scientific evidence available today Koninklijke Philips Electronics N.V. All rights reservedFatto in Székesfehérvár, il 02 Febbraio Hungary Risk of electric shock or fire SafetyDisposal of your old product and batteries Screen carePage » The guest menu is displayed TV overviewSide controls Guest menuAccess the guest menu with guest remote control Access the setup menu with guest remote control Access the setup menu with PBS setup remote controlNavigate the setup menu Select a languageSelect the country Set the number of channels for different kinds Press to configure one of the followingSet the number of channels Set the clockPage Switch on / OSD Configure the switch-on settingsPreset the switch-on power mode Preset the switch-on channelPreset the switch-on volume Preset the picture formatSelect the preferred audio and subtitle language Enable or disable the volume indicatorSet the channel display Display the channel bannerCommercials are aired or when you switch channels Configure the picture settingsConfigure the sound settings Configure the security settingsSecurity Keyboard Lock Enable or disable the TV controlsEnable or disable the remote control Select the security levelOr select no to enable the tuning of double digit channels Configure the control optionsAutomatic detection of Scart signal Enter the setup menu Press to select Configuration ControlSelect the energy saving option Insert RGBEnergy Saving Network Frequency Automatically install the channelsCustomize the TV channels Select the systemSelect a program Select the type of inputMute a channel Select a ringChannels Label a channelPress To select Cloning USB connector of your TVUpgrade Cloning Clone dataPage Healthcare To a remote control of one of those colorsBack connectors Connect devicesVGA Side connectors Insert and activate a CAM Use a Conditional Access ModuleAccess CAM services Use a Kensington lockMultimedia Supported display resolutionsPower Product informationPicture issues TroubleshootingTV power on/ off issues No access to PBS setup menuContact us Communication issuesOther issues Guest RC does not workESP IndexAudio/video out Auto Scart CAMG l i s h