3 Basics of Equalization
Metering modes
The DEQ830 allows you to choose how the Band Gain LEDs will respond in RTA mode. This is done in Utility mode, where you can use the [VALUE] encoder to select between the four different settings of the Peak Mode function, as shown in the chart below.
Displayed |
| Name | Description |
Setting |
|
|
|
0 | No Hold | Peaks are not held. | |
|
|
|
|
1 | 1 | Second | Peaks are held for one second. |
|
|
|
|
2 | 2 | Seconds | Peaks are held for two seconds. |
|
|
| |
Inf | Infinite | Peaks are held until cleared, or | |
|
|
| until you exit RTA mode. |
If you want to reset the peaks while they are being held, press and hold the [RTA] button for about a second.
44
Held peaks may be reset at any time by pressing the [RTA] button and holding it for about a second.