Philips BDS4223V user manual Connecting a Hdtv Decoder SET-TOP BOX, Using RGB Input

User Manual BDS4223V

Audio L/R	Component Video
(2xRCA cables)		(3xRCA cable)

HDTE SET-TOP BOX

RGB cable	Audio L/R
(15 Pin D-Sub)	(2xRCA cables)

HDTV SET-TOP BOX

5.3CONNECTING A HDTV DECODER SET-TOP BOX

Using Component Video Input

1Connect the green (labeled as "Y") jack from the HDTV Set-top box to the green "Y1" jack of the monitor.

2Connect the red (labeled as "PR" or "CR") jack from the HDTV Set- top box to the red "PR1/CR1" jack of the monitor.

3Connect the blue (labeled as "PB" or "CB") jack from the HDTV Set- top box to the blue "PB1/CB1" jack of the monitor.

4Connect the red (R) and white (L) audio jacks from the HDTV Set- top box to the R and L audio-in jacks located next to the "PR1/CR1" connector.

Note:

Some HDTV Set top boxes may not have a Component Video output. Instead, use RGB input method.

Using RGB Input

1Connect the 15-pin D-Sub RGB connector from the back of the HDTV Set-top box to the RGB-IN Connector located on the back of the monitor.

2Connect the red (R) and white (L) audio-out jacks from the HDTV Set-top box to the R and L audio-in jacks located to the left of the S-VIDEO connector.

Notes:

■Some HDTV Set-top boxes may not have a RGB output. Use the Component Video input method if this is the case.

■Upon connecting your HDTV Set-top box to the RGB input of the monitor, it may be necessary to adjust various picture settings on the monitor to correctly match the output of the HDTV Set-top box. This is caused by the different video timings set by various HDTV Set-top box manufacturers.

19