Philips BDS4223V user manual PICTURE-IN-PICTURE PIP / SIDE-BY-SIDE Picture POP

User Manual BDS4223V

7.1.2PICTURE-IN-PICTURE (PIP) / SIDE-BY-SIDE PICTURE (POP)

PIP and POP modes allow you to view two video input sources simultaneously.

Turning on PIP or POP Mode

1Press the PIP key once on the remote control to activate in PIP mode.

2Press the PIP again to switch to POP mode.

3Press the PIP key sequentially will cycle between:

PIP mode:

In PIP mode, a small window is displayed in one of the four corners. The OSD on the upper right corner will denote the input selected for main picture (large screen) and the sub-picture (small screen) displayed.

POP mode:

In POP mode, the screen will be split in half. The screen on the left side is the main picture and the screen on the right is the sub-picture. The OSD on the upper right corner will denote the input signal source for both the main and sub-pictures.

Changing the Input Source for Sub-Picture

Once the PIP or POP mode is turned on;

1Press the SOURCE key to change the sub-picture’s input source

2Press the SOURCE key repeatedly to cycle through all available inputs for the subpicture.

DVI

Changing the Sub-Picture Position in PIP Mode

Once the PIP mode is turned on;

1Press the POSITION key to switch position.

2Press the POSITION key repeatedly to cycle through all four corners of the screen.

33